Thread Tools
May 01, 2019, 09:21 AM
Registered User
Is there not a solder bridge on reverse side you need to use to choose sbus or DSMX.
Sign up now
to remove ads between posts
May 01, 2019, 09:26 AM
Registered User
Stuck in bind mode can mean firmware region conflict. Like you may have FCC N. A. on radio but EU version on your RX. Know Frsky receivers would do this if you flashed wrong firmware. Just a thought.
Jul 20, 2019, 05:08 PM
RRA
RRA
Registered User
I just built a 3" using this FC:
https://rotorbuilds.com/build/18507

I think I got everything ready to fly, but I don't see any OSD even though it's enabled in the configuration page? I'm running betaflight 4.0.4.

When I plug the battery, I can briefly see some bottom text, so it seems that the OSD is "there", but it disapears and I only see the video from the camera, no matter what I add to the OSD configuration.

Any ideas?
Jul 21, 2019, 10:11 AM
RRA
RRA
Registered User
Ok, so interestingly, I tried re-uploading the fonts/logo, but that didn't work.
I then used the camera control joystick to switch the Ratel to NTSC and now I have a strobing OSD.

Anyone ever seen that?


Quick Reply
Message:

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product 20x20 HAKRC F4 Flytower F4 Flight Controller AIO OSD BEC & 20A BLheli_S ESC Barometer Livershifter Banggood.com 15 Jul 15, 2019 08:23 AM
Help! DYS F4 FC V2 Omnibus Flight Controller with Spektrum SPM4649T battlejoker Multirotor Drone Electronics 3 Jun 06, 2019 12:19 AM
New Product Tiny FC on STEROIDS - Super_S F7 Flight Controller 20x20 Betaflight nitbeat Multirotor Drone Electronics 9 Nov 25, 2018 03:30 AM
New Product $25 Omnibus F4 AIO (FC + OSD) clone - Betaflight F4 Flight Controller STM32 F405 MCU lmpuIse Multirotor Drone Electronics 20 May 04, 2017 08:01 AM