Thread Tools
This thread is privately moderated by fastmax, who may elect to delete unwanted replies.
Jan 22, 2018, 01:22 PM
Time For Me To Fly!
fastmax's Avatar
Thread OP
Mini-Review

GoFly RC Falcon CP90-Pro 95mm BNF FPV Racer


GoFly RC is relatively new at making FPV Racing Drones, but they are already changing the micro BNF game. The new Falcon CP90-Pro is an awesome little racer that is packed with features, and performs incredibly well.

This little quadcopter comes pre loaded with Betaflight on its Omnibus F3 AIO flight controller with OSD. It has a 20A 4 in 1 BLHeli-S ESC running DShot 600 and powering 1104 7500kv motors. It is rated for 2s, or 3s batteries, so all of you power hungry pilots that love 3s micro speed demons, this might be just the BNF micro for you. For FPV you get the popular RunCam Nano 650TVL camera and a 25/100mw VTX. To top this little package off, you get a programmable RGB LED light bar, and a set of Gemfan Hulkie 2040 props.

This great looking little racer is available as a Flysky FS-RX2A, Frsky XM, or DSMX bind and fly. Here are some detailed pics of everything you get in the box. Stay tuned for flight video coming in just a bit. Don't hesitate to ask any questions. More info, and details coming soon.

Happy Flying!!

EDIT- 7/30/2018

Testing some new rates. This little thing is still my favorite for flying around my yard.

GoFly Falcon CP90-Pro Gemfan 2040 Hulkie Giant Power 2s (1 min 52 sec)


EDIT- 3/11/2018

Test flight on Gaoneng 550mah 80C 3s battery. Still needs some tuning, but it's much better now on 3s than it was with the stock tune.

GoFly Falcon CP90-Pro Gaoneng 550mah 80c 3s Test Flight (2 min 0 sec)


EDIT- 2/28/2012

Testing the Giant Power 450mah 35c 2s from Mojo Racing.

GoFly Falcon CP90-Pro Giant Power 450mah 35c 2s Hulkie Props (1 min 45 sec)


A better quick flight video, in some better weather. Definitely my new favorite backyard flyer!

GoFly Falcon CP90-Pro LOS Flight 2s 2 Inch Gemfan Hulkie Props (2 min 10 sec)


Managed to get a quick video today. More video coming soon.

GoFly Falcon CP90-Pro 95MM BNF Micro FPV Racing Drone (2 min 19 sec)
Last edited by fastmax; Jul 30, 2018 at 08:31 PM.
Sign up now
to remove ads between posts
Jan 23, 2018, 02:16 PM
Time For Me To Fly!
fastmax's Avatar
Thread OP
Rain yesterday afternoon, and now snowing again today Supposed to be a little warmer, and clear tomorrow so planning to get some flight video in the morning.
Jan 24, 2018, 04:59 PM
Time For Me To Fly!
fastmax's Avatar
Thread OP
Quick flight video added above.
Jan 26, 2018, 04:04 PM
Time For Me To Fly!
fastmax's Avatar
Thread OP
Another video added above.
Jan 28, 2018, 09:50 AM
Time For Me To Fly!
fastmax's Avatar
Thread OP
More flight video coming as soon as my battery order arrives!
Last edited by fastmax; Feb 27, 2018 at 08:44 AM.
Feb 27, 2018, 08:45 AM
Time For Me To Fly!
fastmax's Avatar
Thread OP
New flight video added to first post.
Feb 27, 2018, 01:28 PM
Registered User
Hi Fastmax, great pics, two questions:
- will a fs-a8s flysky receiver fit?
- will the wireing allow to fut tbe motors further out on a 115/130 falcon frame without desoldering?
Thanks
Feb 27, 2018, 01:41 PM
Time For Me To Fly!
fastmax's Avatar
Thread OP
Howdy Raffi_CA! Thanks! You could probably fit an a8s RX inside the canopy, behind the camera. In my opinion though the AFHDS-2A receiver that comes with the Flysky BNF is a better receiver, and is definitely smaller, and lighter.

There is probably not enough extra wire on the motors to allow fitting to a larger frame without soldering. At most, there is probably only around 4 or 5mm of extra length, and due to the way they are soldered on coming from behind the pads there isn't much slack available.
Mar 12, 2018, 05:35 AM
Time For Me To Fly!
fastmax's Avatar
Thread OP
3s flight video added to first post.
Apr 09, 2018, 02:51 AM
Registered User
Do you think i can replace the 1104 - 7500kv motors with 1106-6000kv one ?

I have these 1106 motors on a 3 inch quad so it will be easier in case of motor failure ... and these 1104 motor are very fragile
Apr 10, 2018, 02:56 PM
Time For Me To Fly!
fastmax's Avatar
Thread OP
Howdy. Sure, the 1106 motors should have the same spacing, so they should bolt up just fine, and the 20A ESC will have no problems handling them. What makes you say that the 1104's are fragile? I haven't had any issues with them, and I have been pretty hard on this little quad.
Apr 11, 2018, 08:48 AM
Registered User
Well i changed about 3 motors in 3 month ... one loose his axis, one didn t work after falling into water, one was not tight enough and didn t work after falling ...

by the way the realacc 1106 motor i just received are not better ... 2 out of 5 new motor don't work :/
Jul 30, 2018, 01:08 PM
Time For Me To Fly!
fastmax's Avatar
Thread OP
Added a new video with increased rates above. Still really enjoying this little quad


Quick Reply
Message:
Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product GoFly-RC Falcon CP130 BNF FPV Racer fastmax Micro Multirotor Drones 1 Jan 12, 2018 11:55 AM
Discussion GoFLY-RC CP90 Falcon Quadcopter Portland_Pilot Micro Multirotor Drones 0 Jan 09, 2018 07:18 PM
New Product GOFLY-RC Falcon CP90 smg24 Micro Multirotor Drones 4 Aug 18, 2017 01:30 PM
New Product GOFLY-RC Falcon CP90 / 95mm Mini Brushless FPV Drone / Tiny Whoop / 20A ESC / 78g Originalas Mini Multirotor Drones 0 Aug 18, 2017 08:17 AM