1/6 yamaha rhino 4x4 - RC Groups
Thread Tools
This thread is privately moderated by igotit, who may elect to delete unwanted replies.
Jan 08, 2018, 09:03 PM
Trader Rating: 25
Registered User
$350.00 USD
Buyer pays shipping
For Sale

1/6 yamaha rhino 4x4

1/6 yamaha rhino 660 4x4

this body was bought way back in the day as a cheap walmart rc.....had to change that.

6th scale for for size reference its the same size the scx10 crawlers.
everything custom on this ol beast.
ive used her for my fpv trail rig for years,the brushless system has plenty holeshot,spins all 4 tires on launch off concrete.top speed of around 12mph with current pinion,i usually put esc in 50% mode for crawling and fpv.
esc applies strong brake in foward only,reverse is set to 20%....needs programmer to change that.
rear diff is locked,front limited slip via thick greese.
the drivetrain is solid,havent broken anything except for 1 rear dogbone,and 1 suspension arm that was original to the rs4 evo 3 late 90's model.
she really dusty from shelf life in my shop,havent ran her much over the past year.
ill give her a good dusting before the sale.
body isnt mint,has scuffs n scrapes from trail use,roll overs ect....but shes pretty solid and handles a bashing pretty good.
you will not find another like this anywhere.
3s 2700 mah battery will fit under the hood,ontop steering servo,but will need a way to secure it,easy to figure out.i chose to leave it the bed because i used the balance plug to run my fpv gear.

-aluminium plate chassis 3/16 thick
-traxxas locked vxl tranny
-hpi nitro rs4 evo 3 drive line and suspension with custom center driveshafts
-quickrun 60 amp esc (xt60 connector)with 21t brushless motor
-aluminium threaded shocks
-traxxas waterproof servo
-traxxas tqi rx/tx
-front led lights only
-90mm od soft 1.9 tires that came glued to these rims.
-licensed yamaha rhino hard body (very rare find)
-small bag of misc parts,spare a arms set,i think a few dog bones....ect.
11' wheelbase 8.5' track width front and rear.

(fyi....not included) hpi wheely king ring and pinions,output shaft and lockers are drop in fit,plenty aftermarket and oem goodies available for the entire steering and suspension setup.
use of wk output shafts and pinion gear will allow you to run metal driveshaft like rc4wd punishers or similar shafts.
stock drive train has held up just fine over the years.
so dont let the custom driveshafts deter you from buying in fear of no replacement options.
every part on here is still in production.......except the body.

only thing i dont like is the traxxas tx steering,doesnt have alotta throw so turns are kinda wide,im sure theres a youtube vid showing how to adjust the endpoint for steering on the traxxas tqi system,i just find the menu a little confusing to follow.
didnt have this issue with my 9x tx/rx,over the years ive noticed all traxxas radios limit servo travel.

you will need your own battery,i run 3s 2200-2700 mah for over 1.5 hour runtime trail use.
i can sell this a few different ways

rtr $350.....only needs battery and charger
artr $300,no rx/tx
roller $200 no electronics
shipping to the usa only at this time,i take paypal as payment.

started out as a 50 mph nitro car

D13DAD4C-85B7-41EC-89CE-2B9F2316158A by Nick Pellegrin, on Flickr

25FFC4AF-317E-4A9F-8225-B9D318FF5249 by Nick Pellegrin, on Flickr
C3AEE753-7DF2-4A94-963D-AA8484FA3E06 by Nick Pellegrin, on Flickr
14DFBB4E-4775-45B0-8A4A-566A0F03FE50 by Nick Pellegrin, on Flickr
282CD7C5-6F9A-43CD-B384-4350C4D869A7 by Nick Pellegrin, on Flickr
68205DB8-EFAB-40DA-AE87-41BA37A43A18 by Nick Pellegrin, on Flickr
8D7EB4E6-A914-4396-AA8B-8EE01E9E6590 by Nick Pellegrin, on Flickr
9500E392-CF3E-484C-BFA9-AB61C1009097 by Nick Pellegrin, on Flickr
F1D7AC82-097E-4A37-AE03-32AA0DE77497 by Nick Pellegrin, on Flickr
EEDB8CC5-9CBF-41B3-918B-02DBC29F042D by Nick Pellegrin, on Flickr
E51E4617-BEE4-43E7-8C77-62904CEA19FB by Nick Pellegrin, on Flickr
7DBC153A-F2C6-4E58-B46A-79F9AE97BECD by Nick Pellegrin, on Flickr
70B08071-4C33-473B-9A72-704143BC6FB9 by Nick Pellegrin, on Flickr
911C1D03-4020-461D-A396-256D539A0F41 by Nick Pellegrin, on Flickr
F16B3B52-7250-4AD8-B86F-0DA4D5E6EB05 by Nick Pellegrin, on Flickr
Last edited by igotit; Jan 08, 2018 at 11:06 PM.
Sign up now
to remove ads between posts
Jan 10, 2018, 06:35 PM
Trader Rating: 25
Registered User
made a short vid today showing how she runs.nice crawling power,and good top end.
its impressive with front diff open....so its really 3 wheel drive.

1/6 yamaha rhino 660 4x4 (1 min 30 sec)
Last edited by igotit; Jan 10, 2018 at 10:24 PM.

Quick Reply
Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold 1/6 yamaha rhino igotit Cars - Trucks and Parts (FS/W) 4 Mar 30, 2016 08:31 PM
Discussion 1/6 yamaha rhino igotit Off-road Cars 22 Mar 27, 2016 10:16 PM
Discussion 1/6th yamaha rhino project. igotit Large Scale Cars 13 Feb 20, 2013 10:42 PM
For Sale Redcat Shredder XT 4x4 (1/6 SCALE) ttown504 Cars - Trucks and Parts (FS/W) 4 Apr 29, 2012 12:14 PM
Sold REDCAT Shredder XT 4x4 (1/6 SCALE) & Spektrum tx/rx ttown504 Cars - Trucks and Parts (FS/W) 1 Feb 06, 2012 10:36 PM