Parts List:
STRIX Goblin - High Performance FPV Plank - PNP
https://www.readymaderc.com/store/in...th=112_935_956

Eagle Tree - Vector FPV Controller Package - XT60
https://www.readymaderc.com/store/in...oducts_id=2306

RunCam Owl Plus
https://www.readymaderc.com/store/in...oducts_id=5723

1.3GHz 400mW Transmitter - US VERSION
https://www.readymaderc.com/store/in...roducts_id=915

Dragonlink Micro Receiver
http://fpvpro.com/micro-receiver

Dragonlink - Receiver Antenna For Dragon Link - SMA Mount
https://www.readymaderc.com/store/in...oducts_id=3519

Reference:
How to Build the Goblin

How to Build the Goblin (12 min 34 sec)

Vector Settings
https://www.rcgroups.com/forums/show...&postcount=640

RunCam Owl Plus best settings

Runcam OWL Plus - Best Settings (0 min 46 sec)

Dragonlink_Vector_Taranis_Telemetry
https://github.com/gregorg/Dragonlin...anis_Telemetry

Compare to:
Ritewing Mini Drak
https://www.readymaderc.com/store/in...oducts_id=6635

Since I purchased the PNP version there wasn't a whole lot of building to do.

Well, that was about the scariest maiden flight ever! I managed to get her back with absolutely no damage, but clearly there needs to be a some more tuning to get her flying right.

scary maiden (2 min 19 sec)

The re-maiden, some months later...

Added 5mm of reflex to the wings and it flies much better. We just need to do something about that annoying porpoising in 2D mode.

Goblin Re Maiden (8 min 23 sec)

I turned down the elevator throws and that solved the issue with porpoising. Apparently planks are very sensitive to elevator input.

Strix Goblin 111MPH on 11/11! (10 min 47 sec)