Thread Tools
This thread is privately moderated by Black Turbine, who may elect to delete unwanted replies.
Dec 14, 2017, 05:29 PM
Registered User
Thread OP
Mini-HowTo

hi and welcome frends


so i bet u like quadcoptes so u probably know what brushless motor is i bought racerstar BR0703 brushless outrunner motors and they are tiny only 10 mm wide 1mm shaft and they are horrible i was mounting it and the wire simply fell off at that point i was ready to flip a table so if u wanna see me repair them just follow me into this repairing nightmare i cannot get a good pic on the stator how small it is

HERE WE GO
1. tools + soldering station+1mm drill bit
2. materials bamboo stick 14cm long 4.2mm wide or close to those sizes, 7mm long coarse thread(wood screw thread) screw 1.7mm wide, fine tooth screw 1.3mm wide any length will work
PROCEDURE
1. unscrew the mounting screws
2. cut or unsold er the wires
3. remove the propeller
4. remove the retainer
5. remove the rotor of the stator
6. remove the old coils
7. remove the mount
8. making the jig
9. winding the stator
10. gluing the coils
11. brake
im so close to rage quit 3 times i give all steps 3 times they do not upload and i have to start all over again RC Groups fix your stuff
Last edited by Black Turbine; Jan 20, 2018 at 05:28 PM.
Sign up now
to remove ads between posts


Quick Reply
Message:
Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Cool [Welcome] RC Hobby Toys Online Store - HobbyAnt.com [Welcome] HobbyAnt Hobby Stores 7 May 16, 2017 06:08 AM
Build Log DIY large hi-tech dual-screen ground station build / help currently welcome Guardian257 The Builders Workshop 2 May 28, 2015 10:20 AM
Discussion Hi Welcome everyone,!!!!! mayor001 Product Announcements 0 Jun 25, 2012 07:00 PM
Hi! I'm Dick Clark and welcome to "The Zonies"! Steve Wrona Site Chat 1 Nov 13, 2001 02:10 PM
Help from our frends in Germany- Graupner question Kevin Murray Electric Plane Talk 3 Jul 31, 2001 03:06 PM