Ford Flivver Wing done - RC Groups
Thread Tools
This thread is privately moderated by UpNup, who may elect to delete unwanted replies.
Nov 10, 2017, 05:17 PM
Who are these that fly?
UpNup's Avatar
Build Log

Ford Flivver Wing done


The wing on the 1/5 scale Ford Flivver came together. It was far more technical than anticipated. Cross-grain web shearing had to be cut and fitted between each rib. I was glad for the short kit laser cut ribs, but still had to swing by the store for 1/16 sheeting. I finally tacked a second set of plans to the wall for reference. Im glad that I chose to do the landing gear first as it was important to get the insertion holes drilled correctly into ply before sheeting. There are at least 60 hours of work into completion.
Sign up now
to remove ads between posts

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Video Beautiful Ford Flivver scale 1:5 BjarneKvilvang Fuel Plane Talk 5 Sep 22, 2016 06:56 PM
Discussion Ford (Stout) 2-AT finished... need 3-view of Ford Flivver Newtron Scale Kit/Scratch Built 6 Jul 02, 2007 09:44 PM