Thread Tools
Nov 09, 2017, 03:48 AM
Registered User

Naze32 afroflight WONT connect to betaflight or cleanflight.

Windows 10,
Iíve installed the drivers, but Betaflight/Cleanflight says ďno configuration recieved within 10 seconds, communication failedĒ

Iíve tried a DYS F4 PCB/Flight controller and it connects no problems at all.

Any help would be appreciated. I donít want to give up yet.
Sign up now
to remove ads between posts
Nov 09, 2017, 09:19 AM
Registered User
Ace12GA's Avatar
Flash it. Chances are the firmware loaded on it is old and can't talk to the newer software.
Nov 09, 2017, 09:57 AM
Registered User
You will likely need to boot into bootloader mode, then fully flash it.
Nov 09, 2017, 12:49 PM
Team AlienWarpSquad
This is a Duplicate Thread- Answer in other thread.

Quick Reply

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Help! Another Naze32 problem.. Cleanflight wont connect LukesGFX Beginner Multirotor Drones 28 Sep 17, 2018 01:40 PM
Help! My mini nase32 wont turn on or connect to cleanflight GinjaNinja Multirotor Drone Electronics 0 Mar 17, 2017 03:05 PM
Discussion qx90 wont connect to cleanflight/betaflight LECA Micro Multirotor Drones 2 Nov 26, 2016 07:55 AM
Help! Naze32 Rev6 AfroFlight wont arm yaoweic Multirotor Drone Electronics 12 Jul 28, 2016 04:14 AM
Discussion Naze32 Rev6 wont reboot or save Cleanflight Focusmad Multirotor Drone Electronics 43 Jan 05, 2016 02:12 PM