Xps TX module - RC Groups
Thread Tools
Oct 20, 2017, 03:56 PM
Registered User

Xps TX module

Hello Jim, my JR PCM 12X can output ppm but I need the PCM module to do this. I have been trying to find one but to now avail. I have a 24 xps TX module but not sure it is the correct one. See picture and advise please.
You also mentioned in one of your posts about connecting bottom pins 2 to 6 for the TX to recognise the xps module. Could you please advise also.
Many thanks

Cape Town
South Africa
Sign up now
to remove ads between posts
Oct 21, 2017, 02:27 PM
I was describing what I did for our 12X module (which you show a picture of in your post).
Oct 21, 2017, 04:39 PM
Registered User

XPS TX module

Thanks Jim, please confirm that this is what you did. Mine is not bridged.

Many thanks
Oct 22, 2017, 01:46 AM
Your what is not bridged? That module that you show the picture of is exactly what you need for a JR12X (European model only) or a Graupner MX-24. You don't need to do anything to it!
Oct 22, 2017, 05:00 AM
Registered User
Many thanks Jim. Great stuff.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Is it possible to easily turn a XPS Futaba module to universal style module Ghia Xtreme Power Systems 13 May 30, 2017 11:25 PM
Question Physically separate the XPS Tx Module and the transmitter box FlyingW Xtreme Power Systems 5 Oct 06, 2016 07:36 PM
Discussion XPS TX module for Futaba 10C (special) pwkpete Xtreme Power Systems 3 Mar 31, 2009 03:19 PM
Question Revised XPS TX module Craig 01 Xtreme Power Systems 42 Aug 29, 2007 03:54 PM
Discussion Who uses a Tx tray with XPS module? Ghia Xtreme Power Systems 0 Aug 24, 2007 03:35 PM