LaForge V2 Fatshark Module - V3 Firmware

The LaForge V2 Pro

The LaForge V2 Pro was designed exclusively for the Fat Shark module bay. With this main module you will immediately have the power to quickly tune into your crafts channel, or scan the spectrum to find a free channel. Add the diversity module for an even more reliable FPV experience.

What's in the box?

• 1x LaForge Main Module v3
• 1x Main Module Molded door
• 1x 90° SMA

Features

• Save Channel - Startup with last saved channel and settings.
• Screen Saver - Display current channel, call sign, and signal strength.
• Settings Menu - Calibrate RSSI, set call sign, frequency order, save.
• Quick Save - Hold select for 2 seconds in manual mode & Search Mode.
• Status LEDs - Indicates power, status, and active antenna.
• IR Emitter - Quickly bind to the LaForge Pro module. (Recommended as a backup source for pro module. IR Remote is the preferred method)Quickly bind to the LaForge Pro module.
• Three Button navigation - Up, down, select.
• Manual Mode - Set channel manually.
• Search Mode - Search next channel based on signal strength.
• Scanner - *Scan spectrum of all 40 channels.
• Clean Power - Large 470uf tantalum capacitor.
• Dual Antenna Filter

Channel Mappings

• 5865 - 5845 - 5825 - 5805 - 5785 - 5765 - 5745 - 5725 - Band A
• 5733 - 5752 - 5771 - 5790 - 5809 - 5828 - 5847 - 5866 - Band B
• 5705 - 5685 - 5665 - 5645 - 5885 - 5905 - 5925 - 5945 - Band E
• 5740 - 5760 - 5780 - 5800 - 5820 - 5840 - 5860 - 5880 - Band F / Airwave
• 5658 - 5695 - 5732 - 5769 - 5806 - 5843 - 5880 - 5917 - Band C / Raceband

• The back of the LaForge V2 Fatshark module.
• LaForge V2 Fatshark Module - V3 Firmware

Learn More and Order

Head over to our friends at ReadyMadeRC for more info.