Emax LS (Lite Spec) 2206 & 2207 Motors - New Series Coming Soon - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Sep 25, 2017, 12:49 AM
Registered User
New Product

Emax LS (Lite Spec) 2206 & 2207 Motors - New Series Coming Soon


Emax LS2206 Lite Spec 2206 2300KV/2550KV/2700KV: https://www.banggood.com/EMAX-LS2206-Lite-Spec-2206-2300KV-2550KV-2700KV-CW-Thread-FPV-Racing-Brushless-Motor-p-1204499.html

Emax LS2207 Lite Spec 2207 1900KV/2400KV/2550KV: https://www.banggood.com/EMAX-LS2207-Lite-Spec-2207-1900KV-2400KV-2550KV-CW-Thread-FPV-Racing-Brushless-Motor-p-1204508.html

Emax will shortly release a new motor lineup dubbed "lite spec", with motors available in 2206 and 2207 sizes in 2300KV, 2550KV, 2700KV
and 1900KV, 2400KV, 2550KV respectively. They will be priced at $22 for the 2206 variants and $23 for the 2207s. Among other improvements, Emax has decided to include 120mm of 18 AWG silicon wire for those with 4-in-1 ESCs.


Key Features:
-NSK high efficiency bearings
-0.15mm silicon steel laminations
-Aluminum shaft with hardened steel core
-1.8mm N48SH ARC Magnets
-Screw capture for bell. Easy to service
-Stealth black anodized color, with silver beveled edges
-Reduced base size. Lower the weight and easier to make sure not to short your wires with long screws.
-16mm x 16mm mounting holes ( 19x16 is the past) future frames don’t need to have slotted mounting holes.
-120mm 18AWG wire. Testing has shown a 5% increase in performance with thicker gauged wire. Compared from 20AWG wire.
-New bell design with upper and lower beam support to reduce damage from collapse of impacts.
-29g/30g 2206/2207 without wire


Last edited by D Gains; Sep 25, 2017 at 10:18 PM.
Sign up now
to remove ads between posts
Sep 25, 2017, 03:54 AM
Registered User
N48 magnets, I'm interested to see how they perform
Sep 25, 2017, 06:49 AM
FPV addict
mlilasic's Avatar
This new design bell design looks great and sub 30g mass is most welcomed.
Sep 25, 2017, 07:27 AM
Registered User
They just got listed on banggood, no extra info in the listing as yet...

2206

2207

These look very nice, I've had my eye on the Hyperlites from piroflip but postage from the USA is such a pain in the butt....
Sep 25, 2017, 01:42 PM
☢ Self-Proclaimed n00b FPVer ☢
EngineerX's Avatar
Quote:
Originally Posted by discord5000
They just got listed on banggood, no extra info in the listing as yet...

2206

2207

These look very nice, I've had my eye on the Hyperlites from piroflip but postage from the USA is such a pain in the butt....
Sweet! Alrite since everyone is throwing their affiliates here's mine P=FR3104108021201212@4
BUY BUY BUY !!!
LOL
Sep 25, 2017, 03:53 PM
Registered User
Quote:
Originally Posted by EngineerX
Sweet! Alrite since everyone is throwing their affiliates here's mine P=FR3104108021201212@4
BUY BUY BUY !!!
LOL
Much more deserved. I will buy from it.
Sep 25, 2017, 10:17 PM
Registered User
Quote:
Originally Posted by EngineerX
Sweet! Alrite since everyone is throwing their affiliates here's mine P=FR3104108021201212@4
BUY BUY BUY !!!
LOL
On a more serious note, will you be getting these to test anytime soon?
Sep 26, 2017, 08:00 AM
Registered User
I wonder what the exact weight will be
Sep 26, 2017, 08:52 AM
IG: nectar.collector
OpusNectar's Avatar
Quote:
Originally Posted by pacoAW
I wonder what the exact weight will be
I usually assume the worst and +2g to claimed weight. So 31 with wire for the 2206, and 32 for the 2207.
Sep 27, 2017, 04:05 AM
Quad Enthusiast
N48SH magnets using 5s/6s lipos should be excellent I would imagine!
Sep 27, 2017, 05:10 AM
Registered User
Quote:
Originally Posted by Adamtfc
N48SH magnets using 5s/6s lipos should be excellent I would imagine!
Yes but 4s seems weak.
Sep 27, 2017, 08:37 AM
IG: nectar.collector
OpusNectar's Avatar
Quote:
Originally Posted by downloader9
Yes but 4s seems weak.
I wonder if they went N48 to increase the acceptable tuning envelope with this motor? I know people have issues with feedback and tuning with super coggy, hi torque N52 motors.
Sep 27, 2017, 09:11 AM
"Furadi"
Conradm's Avatar
Quote:
Originally Posted by downloader9
Yes but 4s seems weak.
They're not. I've been using the 2206 2550 for a few weeks. They don't have tons of grunt on the low end like the 2306 but they're very fast motors.

I also have the 2207's and they're insanely fast.
Sep 27, 2017, 01:37 PM
☢ Self-Proclaimed n00b FPVer ☢
EngineerX's Avatar
Quote:
Originally Posted by downloader9
Much more deserved. I will buy from it.
:P LoL ..... thanks buddy, just jokinbg around
These are going to be interesting to fly, thrust tests will be interesting, but actually flying them to see how they "feel" and see how much less they drain batteries will be more interesting. Cool EMAX going for light motors.

Quote:
Originally Posted by D Gains
On a more serious note, will you be getting these to test anytime soon?
I hope so, the guys over at EMAX did mention they would be sending me test samples
Oct 06, 2017, 11:34 AM
Registered User
Quote:
Originally Posted by EngineerX
:P LoL ..... thanks buddy, just jokinbg around
These are going to be interesting to fly, thrust tests will be interesting, but actually flying them to see how they "feel" and see how much less they drain batteries will be more interesting. Cool EMAX going for light motors.



I hope so, the guys over at EMAX did mention they would be sending me test samples
Great I can't wait to see how the 2207 motor does.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Article Spotted! New Flyzone Seawind - Coming Soon Matt Gunn Electric Plane Talk 1167 Nov 18, 2017 10:28 AM
New Product T-Motor: F-Series Motors: 2204 2300kv-2206 1900kv -2208 2100kv Racing Motors RaymondM Multirotor Drone Power Systems 926 Sep 21, 2017 12:22 AM
Discussion New multicoper regulations in Germany (soon to come) CyberCrash Model Aircraft & Drone Advocacy 44 Apr 11, 2017 04:10 PM
New Product New EMax RS1306 Red Bottom Cooling-Series Mini Motors Coming to AddictiveRC.com johnIn2SonAZ FPV Racing 2 Jun 17, 2016 03:40 AM
Discussion New Xcite 20C series coming soon zagimon Batteries and Chargers 4 Jul 05, 2007 12:10 PM