What are ya'll bringin to sell? - RC Groups
Thread Tools
Sep 11, 2017, 03:50 PM
Registered User
Discussion

What are ya'll bringin to sell?


I'm going to start this thread to help others see some of what's goin to be sold at eweek.
Sign up now
to remove ads between posts
Sep 12, 2017, 08:40 PM
Registered User
livinma1's Avatar
It pains me to do this but I just picked up a 76 MXS and need to outfit it with some gear. with that said I have the following for sale.

Good condition minus a rip under the belly which I will either fix or just install the cutout vent. Never crashed/ no gear issues.

Airframe Only $350
Airframe with Servos $ 600
RTF - $850

MotroFly 5320-330KV
Hitec 7955s all around
Castle Creations ESC
Castle Creations Regulator
Sep 12, 2017, 09:46 PM
Registered User
GORCFLYR's Avatar

Bringing to eWeek - Castle Creations 120 HV NIB


If I make it to eWeek, I plan to bring to sell a New in the Box - Castle Creations 120 HV Speed Control.
Price on most sites is 199.00 - looking for 150.00 - never used and downsizing on airplanes so have no future need.
Last edited by GORCFLYR; Sep 18, 2017 at 05:46 PM. Reason: update
Sep 14, 2017, 09:10 AM
Retired USAF EOD
kgalen's Avatar

Planes and more planes!


I plan to bring 6 planes for sale. Some in great shape...others rough looking but very flyable.

First up: VQ models P-47
All Balsa and lite-ply construction
- Fully covered in weathered detail (more details can be found here
- One piece wing for easy transport
- Wingspan: 1220mm (48in)
- Fuselage: 1000mm (39.3in)
- Fixed landing gear

Motor: Motrofly 3620-750kv (tons of power)
Requires: 4 cell 3,000 to 4,000 battery
ESC: Turnigy Brushless ESC 85A w/ 5A SBEC
Orange (Spektrum compatable) Receiver

Holes 2ea (repaired with shipping tape) on wing. Can be covered with stickers. Otherwise in great condition and flies great. Lots of speed and looks great in the air. $125 OBO
Sep 18, 2017, 09:18 AM
Registered User

For Sale at E-Week 2017


I'll have this Seawinds for sale this year at e-week, this model has retracts, flaps, and lights. It'll run on either a 3-cell or 4-cell 2200 mah battery. Looking for $110.00, just add your receiver and battery.
Sep 18, 2017, 09:20 AM
Registered User

For Sale E-Week 2017


I'll have for sale this year at e-week, this NIB Hanger-9 P-47, this is an ARF kit, it's designed around the E-Flite 60 power system. Really nice kit, looking for $250.00.
Sep 19, 2017, 11:13 AM
Registered User
payneaviation's Avatar

E-beast 60e


will be bringing
new never finished e-beast
has new HS 225mg servos in wing
new Power HD 1501 mg servos in tail
no motor no esc
350.00 with servos
250 without

Eddie
Sep 19, 2017, 12:24 PM
Registered User
payneaviation's Avatar
Also may bring
Sig Rascal 75.00
UMX P3 with 2 batteries 50.00
Diagma 87" Extra 330 kit 200.00


Eddie
Sep 21, 2017, 01:12 PM
Registered User
I'm bringing a hacker A-150 that's never been soldered up. Bought it for the 3dhs 108" extra but then decided to go gas
Sep 25, 2017, 09:21 AM
Registered User
ncflyer79's Avatar
Bringing a partially finished FMS1700mm Corsair. Iv redone the paint scheme, added Callie graphics in the marines dream scheme. New retracts, upgraded FMS 380kv motor. Removed the gear door servos and dremeled out the doors for the gear to retract into. All that's needed is your receiver, lipo and prop blades, I have the hub. Just lost interest in finishing it. Asking 250.00. I'll be there all day Thursday through Saturday morning.
Sep 25, 2017, 02:43 PM
JohnET's Avatar
Hey Guys, I will be there early Thurs and staying until Sat. I will be bringing quite a few of my personal FPV/test craft for sale. A couple RV Jets (one never flown), an Anaconda, a few multirotors, some helis and an interesting "drone" fixed wing kit. Most are RTF or ARF. Look for the Eagle Tree tent if interested!

John
Sep 25, 2017, 03:09 PM
Registered User

Hanger 9 p 47


Pm sent
Sep 25, 2017, 04:02 PM
Registered User
bstanley72's Avatar
Quote:
Originally Posted by ncflyer79
Bringing a partially finished FMS1700mm Corsair. Iv redone the paint scheme, added Callie graphics in the marines dream scheme. New retracts, upgraded FMS 380kv motor. Removed the gear door servos and dremeled out the doors for the gear to retract into. All that's needed is your receiver, lipo and prop blades, I have the hub. Just lost interest in finishing it. Asking 250.00. I'll be there all day Thursday through Saturday morning.
I'll be coming in on Friday afternoon, will take a look at if you still have. I'll PM you so we can exchange info.
Sep 25, 2017, 04:13 PM
Registered User
I'll be there Wednesday. If there is interest I'll bring NIB 2 Tower Kaos 40 ARFs. $80 each, or $150 for both. I also have two OS-56a Four Stroke, also NIB, that I bought for the Kaos's. $150 Each, or $280 for both. Again, all NIB, you can pay me there, or pay pal me before.
Last edited by skyboy50; Sep 25, 2017 at 05:17 PM. Reason: Added to description.
Sep 25, 2017, 07:18 PM
Jus 1 more plane is all I need
NashVegas's Avatar

Extreme Flight Pantera


Extreme Flight Pantera
- Air frame
- Hitec HS70 MG servos
- B & E Graphix

No motor or ESC
Latest blog entry: Extreme Flight 91" Laser


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Who's Coming and what are ya bringing? greenseaships Arizona Electric Festival 2016 106 Feb 28, 2016 06:56 AM
Discussion So What Are Yah Bringin... Pics Please old_coastie Hobbico E-Fest 2015 6 Jan 23, 2015 02:15 PM
Question What are ya'll using for skids muskis2 High Performance 16 Jun 26, 2009 12:21 PM
Ordering Twinstar....what batts and ESC ya'll using? fred420 Foamies (Kits) 8 Oct 28, 2002 05:20 PM