|
|
|
New Product
Concept X5 - the legacy
A lot of new planes entered the market in the past months and Team Concept does not want to stay behind new trends and technologies.
There are a lot of big changes to announce - first and most important one is the new cooperation between Concept DLG and the fabulous Stream Team. I am more than happy, that Laurynas Ceskevicius agreed to produce the new CX5. I am also truely happy that Nick Wu from Aero+ agreed to chime into this project. As most of you know, Nick was even as close as I was to my father Roland Sr. and we both learned a lot of him. It was a real challenge for Nick and I to match the high expecttions of my father when designing a new plane. I think, Nick did a fantastic job and we are both very happy with the result. Why a Concept X5? Well, most of you know the variety of CX planes over the years and in my opinion, we are still having the best wind penetrating plane on the market with the CX4. But being good here needs a trade off in other parts of the flight envelope. Saying that, the CX4 was never known to be the killer deadair plane. We did several things here... First one was to move the flight envelope towards better deadair characteristics but giving away only little of the wind penetration abilities. So, thiner airfoil with a wing area of 19,5 sqdm. New, more aerodynamical fuselage with slip off nose (designed by Laurynas himself) and finally - a solid core wing! That was one of the reason, why I asked Laurynas for a cooperation - he is the best producer of solid core wings and also one of the top overall quality producers worldwide...From the scratch he was able to match the defaults concerning weights. An AUW of 210-230gr should be achieved very easily. So far, we have wing - CW40 layup with HM carbon reinforcement ~105gr Fuselage - ~ 35gr tailset - average ~ 10.3gr We will offer 2 basic designs with various color combinations. Shipping will be directly from the Stream Team. You can order your plane either: - via www.streamf3k.com(rasu50a@yahoo.com) - through myself via PM or via conceptx.order@gmail.com There will be only one distributor worldwide for the CX5. Aero+ will sell it for us in Asia, so all our Asian/Pacific friends will have the opportunity to order the CX5 via www.aeroplus.co At the beginning, 2 designs and 2 layups will be available with various color combinations. A camouflage design and a design that allows best visibility and contrast with lowest possible weight. Standard layup will be CW40 with an IM carbon reinforcement and a little heavier but stronger Samurai layup. We will add a light layup very soon when tested okay I will let you follow my build of the CX5 here in this thread very soon. Bruno Pavani, George Morris and Vincent Merlijn will get their planes soon and I am sure that they are going to share their build and flying experiences, too... Prices: Light layup with CW20 and reinforced spar (~95gr wingweight) 699,00€ Standard layup with CW40 and IM reinforcement (~105gr ww) 699,00€ Strong layup with Samurai and IM reinforcement (~115gr ww) 749,00€ Finally, I want to say how proud I am that cooperation and communication between Laurynas, Nick and I went so flawless. From scratch to production, we only needed around 6 months. Special thanks to Nick who agreed to work with us although he had tons of work with the Flare. Really would like to hear Seniors opinion about it from the F3K sky Take care, Rollo P.S. HERE ARE SETUP AND BUILD INSTRUCTIONS !!‘!!! PLEASE NOTE THAT THERE IS A LITTLE MISTAKE ON PAGE 3 OF THE BUILD INSTRUCTIONS - FIRST PICTURE SHOWS BOTH RUDDER AND ELEVATOR HORN. OF COURSE THE LEFT HORN IS FOR ELEVATOR AND THE RIGHT HORN IS FOR RUDDER !!!!!!‘!!! PLEASE ALSO CHECK OUT THIS WONDERFUL REVIEW AND BUILD INSTRUCTIONS FROM JASON COLE https://www.rcgroups.com/forums/show...-X5-DLG-Review ImagesView all Images in thread |
Last edited by Rollo340; Oct 08, 2022 at 02:40 AM.
|
|
|
|
|
|
cool man
|
|
|
|
|
|
That is beautiful !! I love the graphics on the wing, it is elegant without being over done. If she flies as nice as she looks you have a podium taker in your hands.
|
|
|
|
|
|
Well, that's our main goal ...thanks for the design comment. We chose it because it gave us best contrast with least amount of paint for lowest possible AUW. Maybe other design will follow - we have around a dozen in the drawer
|
Thread Tools | |
Similar Threads | |||||
Category | Thread | Thread Starter | Forum | Replies | Last Post |
Build Log | Legacy Avaition 65" Turbo Duster | zhavener | Sport Planes | 97 | Oct 28, 2020 06:55 PM |
Discussion | G W Bush legacy seems to be unfolding in print, and its not kind | AA5BY | Life, The Universe, and Politics | 80 | Nov 19, 2015 03:08 AM |
Discussion | INSPIRE 1 PRO X5 and X5 RAW available here for Pre Order | patrick21x | Multirotor Drone Talk | 0 | Sep 10, 2015 09:45 PM |