Thread Tools
Jun 14, 2017, 05:25 PM
Laughs at un-boxing videos...
basicguy's Avatar
Thread OP
Discussion

1 meter flying wing. Pic and Vid


I have printed all three of Wersy's plank wings, this one he designed for me,

Has a 1000x204mm wing. Flight weight is about 2 pounds The motor is a Leopard LC2835-7T http://www.leopardhobby.com/html/en/...150921/83.html driving a 7.5x4.5 HAOYE folding prop. Am powering it with a 16004s battery. It pulls 28 amps at full throttle which what I launch at.

Flight Video:
1 Meter Plank (3 min 55 sec)

Flying foamies has spoiled me on landing. This plane has much lower drag than an equivalent foamie. I usually just throttle back and it sinks in. This will glide across my flying field 2x. I'll figure it out.
Sign up now
to remove ads between posts
Jun 14, 2017, 07:08 PM
Same Day Delivery
mike3976's Avatar
Don't see any price info for the motors, looks like there being promoted as prememium goods ?
Jun 15, 2017, 10:40 AM
Laughs at un-boxing videos...
basicguy's Avatar
Thread OP
Mike I am promoting just the plane and some of the details that went into it. It is made from just over a pound of PLA. I am printing it on my $160 dollar 3D printer.

The link is the importers site that shows motor details. You will have to use google to find a vendor. I think I paid $20 for the motor from a US seller. There are probably 50 different motors that will fit and fly the plane.


Quick Reply
Message:

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Mini-Review **UPDATED**ACME 1/16 RC Brushless MonsterTruck A2040 -ARR |REVIEW|PICS&VIDS Danq0 Off-road Cars 67 Nov 08, 2016 04:22 PM
Discussion 3,8 meter flying wing SpeedsterDEN Foamies (Scratchbuilt) 4 Sep 24, 2016 03:06 AM
Discussion My 1 meter flying wing wzg_zxl Flying Wings 0 Jan 14, 2016 10:40 PM
Discussion New lightweight flying wing. Now pics and video. basicguy Scratchbuilt Indoor and Micro Models 2 Nov 13, 2015 01:00 PM