Thread Tools
Jun 09, 2017, 08:31 PM
jonni
Thread OP
Help!

Help with Betaflight configuration for FS-IA6 receiver


Greetings,

So recently I just finished building my quadcopter using the SP Racing F3 board and so far so good, up until it came to controlling the quadcopter with the transmitter.

This is the Tx and Rx that I got - https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

The receiver, called the "FS-IA6" binds perfectly fine to the transmitter which is an FS-i6 AFHDS 2A. The only issue is that when I get to the "Configurations" tab in Betaflight I feel like I'm not selecting the correct settings for the receiver, because I can't control the drone using switches or any of the throttles. It just doesn't work.

I'm also not sure about wether the port settings for me are correct. I'm clueless as to which ports should be the Rx port and which one should have MSP on.

I've been working on this for the past 10 hours, so this is pretty frustrating to say the least. Anyways any kind of help is much appreciated. Thanks.
Sign up now
to remove ads between posts


Quick Reply
Message:

Thread Tools