Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Oct 22, 2004, 11:23 PM
Monstermanhbf is offline
Find More Posts by Monstermanhbf
I Always Fly Inverted
Monstermanhbf's Avatar

Nitro Bike owners!! What glow plug igniter set up???


Hey guys,

Well I finally got my bike back together tonight. I am trying to figure out a easy way to start it though!! LOL.... Getting my glow plug igniter on the glow plug is a chore in itself. I have several, long, short, rechargable, panel ready. What are you guys using and what if any secrets to starting easily is there? I am trying to peice together some sort of remote glow plug igniter from some spare parts I have laying around.



1st choice- I have a Traxxas ez start connecter, I was thinking to run it direc to the plug and positive on my power panel, then running a ground to the chassis of the bike, using maybe some dean connecters on each end this way once started I can just unplug the wire leaving the glow plug end connected and negative end connected as well and just tuck the short ends away somewhere on the bike.
If you guys have any other suggestions or can tell me what your using I would appreciate it.

Thanks
Chris
Sign up now
to remove ads between posts
Old Oct 23, 2004, 12:33 PM
nuovaic is offline
Find More Posts by nuovaic
Registered User
nuovaic's Avatar
Chris,
I started off with a remote adaptor, fitted to side panel, but it kept falling off while trying to start it. Eventually I gave up and now use a 2 volt MFA driver with meter which is a little difficult to fit on, but you get used to it once you've found the right way and it stays on. Also have a mini driver which screw locks on, easy to fit and stays on too, battery just doesn't last too long. If you got a LHS nearby, take the bike in and find something suitable.

John
Old Oct 23, 2004, 07:55 PM
lorenzo_MiniGP is offline
Find More Posts by lorenzo_MiniGP
2 Wheel Junkie 4 Life
lorenzo_MiniGP's Avatar
Check my website.. tips page.. It has a picture of what I use
on the nitro and it works great!

http://www.rcbikes.com


Lorenzo
Old Oct 24, 2004, 06:53 PM
sixdub is offline
Find More Posts by sixdub
Registered User
I use this extended remote glow connector. Easy to install and reliable. http://www2.towerhobbies.com/cgi-bin...&I=LXCLZ3&P=ML
Old Oct 24, 2004, 07:20 PM
wicked_n_raw is offline
Find More Posts by wicked_n_raw
The Raw 1
wicked_n_raw's Avatar
Quote:
Originally Posted by sixdub
I use this extended remote glow connector. Easy to install and reliable. http://www2.towerhobbies.com/cgi-bin...&I=LXCLZ3&P=ML
This is the same thing I use!

Regards,
Furron


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Cheap Glow Plug Igniter lazy-b DIY Electronics 10 May 10, 2005 04:16 AM
what glow plug to use????? please help eliotwebb Fuel Plane Talk 1 Jan 26, 2005 05:04 PM
what is the most powerful motor set up for 550mm Logo10? GTOVR4 Electric Heli Talk 10 Nov 11, 2004 11:47 AM
What's the best control set up for IFOs? Nowell York Scratchbuilt Indoor and Micro Models 32 Apr 23, 2004 11:54 AM
What would be the perfect set up for this plane? ttnissan Sport Planes 3 Nov 12, 2001 02:22 AM