Thread Tools
This thread is privately moderated by old4570, who may elect to delete unwanted replies.
May 19, 2017, 05:23 AM
Registered User
old4570's Avatar
Thread OP

iRangeX IRX4 bound to my Walkera QR W100s

iRange IRX4 bound to Walkera QR W100s (1 min 0 sec)

iRange IRX4 @ BG

Wow ! The bind was painless ...
( Turnigy 9XR pro / openTx 2.2 )

It took me something like 20 attempts to bind the W100s to my Devo 7e ..
Binding the W100s to the IRX4 took all of one attempt .

Let me describe the bind process , seems to be some what reliable !

In the first menu ( setup )
go to multiprotocol ( where you chose your module )
Just chose Devo for the protocol ( for the W100s )

There is a option for Bind ( BND ) in the menu under multiprotocol ..

I like to fire up the Tx , and highlight the BND ( bind ) function ready for activation ( menu key )
Then plug the battery into the model , which will go into bind mode ...
As soon as this happens I start the bind process in the Tx ...
This method is as yet to fail to bind ..

See picture for throttle cut ..

Under special functions ...
Pick a empty slot , toggle your throttle cut ..
And just do what is shown in the picture ...
Now you can play ...
Last edited by old4570; May 19, 2017 at 10:17 PM.
Sign up now
to remove ads between posts

Quick Reply
Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Help! Walkera QR W100S ( Wont bind ) old4570 Micro Multirotor Drones 1 Jan 18, 2017 08:35 PM