Thread Tools
This thread is privately moderated by smoothvirus, who may elect to delete unwanted replies.
Mar 27, 2017, 04:24 PM
Registered User
smoothvirus's Avatar
Thread OP
Build Log

Pitlab OSD for Mini Talon FPV

I've been impressed with the Pitlab OSD/Autopilot for a long time now and I finally got one this spring. I was originally going to install it in my Finwing Sabre but I feel like the Sabre is so well tuned that I don't want to spoil a good thing. So I will be installing the Pitlab OSD into a brand new XUAV Mini Talon.

Parts List:

OSD and Autopilot FPV kit

X-UAV Mini Talon

CXN - Mini Talon FPV Pod

CXN - FPV Camera Pan/Tilt (32x32mm)

RunCam HD2 - Orange

Dragonlink - Rx Antenna with 12" (30cm) Cable

1.3 GHZ Video Transmitter Antenna - 3 CM Extension

RMRC - 1.3GHz 400mW Transmitter - US VERSION

Airspeed MicroSensor V3

Cobra C-2221/16 Brushless Motor

Cobra 40A ESC BEC

Dragon Link V3 ADVANCED Large Complete System

RMRC - LC Power Filter - 1.7A

Turnigy Multistar Twin Output 5/10 Amp (6-50V) SBEC for Lipoly

Xoar PJN Electric 9x6 pusher prop 1m Mini USB Cable Cord - A to Up Angle Mini B - Black (USBAMB1MU)


Main Page

Download Page

RCGroups Thread

V Tail Config

Pitlab OSD Playlist

Micro Receiver with Telemetry

V3 Quick Setup


How to change OSD layout in flight

Autopilot tuning questions
Last edited by smoothvirus; Aug 03, 2018 at 10:41 AM.
Sign up now
to remove ads between posts
Jun 12, 2017, 09:20 AM
Registered User
smoothvirus's Avatar
Thread OP
Just wanted to say now that I've had a few flights on this system, it's made my Mini Talon into an absolute sweetheart of a plane. I'm really enjoying flying with Pitlab and all its features. I plan on putting together some videos on my experiences with it.

Quick Reply
Thread Tools