Turnigy NTM 5050-580kv Moter (New) - RC Groups
Thread Tools
This thread is privately moderated by Jack_K, who may elect to delete unwanted replies.
Mar 20, 2017, 10:00 PM
Trader Rating: 5
Registered User
$40.00 USD
Buyer pays shipping

Turnigy NTM 5050-580kv Moter (New)

Here's an NTM 5050-580kv brushless outrunner motor. It has never been used.
I bought this with the intention of using it on an 80" airplane, but instead decided to go with a gas engine.
I mounted it on a wooden motor mount from a Great Planes U-Can-Do SF so I could test it to be sure it works.
I'll include the motor mount with it.

The dimension from the firewall end of the mount to the propeller hub is 5". Hole spacing on the mount is approximately 1-5/16"

Model: NTM Prop Drive Series 50-50 580kv
Kv: 580rpm/v
Max current: 90A
Max Power: 2000W @ 22.2v (6S)
Shaft: 8mm
Weight: 347g
ESC: 100A
Cell count: 4s~6s Lipoly
Bolt holes: 30mm
Bolt thread: M4
Connection: 4mm Bullet-connector

Prop Test Data:
14x8 - 14.8V / 587W / 40.3A / 2.9kg thrust
14x8 - 18.5V / 1077W / 60.7A / 4.03kg thrust
14x8 - 22.2V / 1906W / 88.2A / 5.36kg thrust
15x8 - 14.8V / 626W / 43.6A / 3.3kg thrust
15x8 - 18.5V / 1165W / 64.2A / 4.85kg thrust
15x8 - 22.2V / 1961W / 88.8A / 6.15kg thrust
Last edited by Jack_K; Mar 21, 2017 at 10:58 AM.
Sign up now
to remove ads between posts
Mar 21, 2017, 12:04 AM
Trader Rating: 24
Registered User
richardojohnson's Avatar
Mar 21, 2017, 10:48 AM
Trader Rating: 5
Registered User
Originally Posted by richardojohnson
I haven't received any payment.
Mar 22, 2017, 12:01 AM
Trader Rating: 24
Registered User
richardojohnson's Avatar

payment sent

sent 50.00 paypal

Thread Tools