3 Blade EP9070 on GWS 350-C Opinions Please! - RC Groups
Thread Tools
Oct 09, 2004, 01:22 AM
Registered User

3 Blade EP9070 on GWS 350-C Opinions Please!

Can anyone tell me if this setup will work on a GWS Zero? Thank you. Dennis
Sign up now
to remove ads between posts
Oct 09, 2004, 06:36 AM
We want... Information!
Bruce Abbott's Avatar
It should go well on a 6 cell NiMH or 2 cell Lipoly. Full throttle current is 8~9A, so use a battery that can supply this (eg. KAN650, Polyquest1100).
Last edited by Bruce Abbott; Oct 09, 2004 at 09:32 PM. Reason: Zero has 'C' (not 'B') gearbox! Corrected current draw.
Oct 09, 2004, 07:14 AM
Registered User
vintage1's Avatar
Too much prop for the C geared motor on anything much over 6 cells.

Use D gearing and no more than 7 cells or 2s LIPO.
Oct 09, 2004, 01:15 PM
Registered User


Thanks for the info. gentlemen. Dennis

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Question GWS 109 - brushless w/ FSK 3 blade prop on 2s? elsyr Electric Warbirds 13 May 16, 2007 11:08 PM
2cell and 3 cell on GWS 350 "D" mrfliboy Batteries and Chargers 4 Nov 16, 2005 12:05 PM
Question 3-blade prop on GWS Zero Perminator Parkflyers 6 Jul 29, 2004 01:10 PM
GWS 3 Blade prop on Himax 2015-5400? JIMA Power Systems 3 Jul 03, 2004 05:52 AM
GWS 9X7 3 bladed prop on an EPS300C-C. Anyone using this combo.. flipnidaho Parkflyers 4 Jan 18, 2003 11:00 AM