Thread Tools
Apr 22, 2017, 09:58 AM
Registered User
Thanks to those who gave important information on this topic to aid me in the decision. I'll unsubscribe now so as to not clutter this thread up.
Sign up now
to remove ads between posts
Apr 23, 2017, 12:44 AM
Rampage's Avatar
Thread OP
Originally Posted by xviper
It's too bad. I prefer a large foamie and I would have jumped on this if it was. I figured if they can make a 2 meter foam Cub and T-28, a Twin Otter can't be far away. I won't do all wood, composite and covered anymore.
Then people would complain about the windows not being clear.
Apr 24, 2017, 01:25 AM
Registered User

I got the model :)

Hey guys
I did order the plane from in Austria.
It's all wood, and no foam at all. The build quality looks really good, and it is a fast build. Probably a week or so.

I will go for a 4s setup with a 5800mah battery.
I'm not sure, but the wing airfoil could be a Clark Y or something close to that. So its a slow, with alot of lift.

The only thing i can complain about is the spinners in the kit, they are ugly and have a bad finish, so i will probably go with DuBro 53mm.

Apr 24, 2017, 07:59 AM
Registered User
Iflyrc_vic's Avatar

Shipping update USA

I got an email from VQ last week that said:
"We will update all our customers in 1 week for status of shipment:-)"
Apr 25, 2017, 06:09 PM
Registered User
DeLaReef123's Avatar
So I spoke with VQModels today and the current status is the boat is on its way and should be hitting the docks late next week. They we need to wait for customs, so ETA is mid-May. I too ordered mine.

Regin, anyway to share some photos or update?
Apr 25, 2017, 06:47 PM
Registered User
I will share some photos when i'm back home.
I'm on a fishing ship at the moment. Expect to be home in a week
Apr 27, 2017, 01:39 AM
Acft Attn Deficit Disorder
Cubcrazy's Avatar
VQ site says Backorder available. Do yall think it's too late to get in on it? Did it say Pre-Order before? I forgot about this model.

Emailed VQ. We'll see what they say..

Only got an automated response, basically an ad...
Still unclear
Last edited by Cubcrazy; Apr 27, 2017 at 02:57 AM.
Apr 27, 2017, 11:57 AM
Registered User
DeLaReef123's Avatar
CubCrazy, the gentleman I spoke with said that he was holding 6 planes for folks that had contacted him directly. I am not sure if that means he has already sold out of the first shipment or not. If you left a VM they should get back to you. They seem to be pretty responsive.
May 23, 2017, 05:38 PM
Registered User

Pictures of the maiden

Sorry for the waiting. Here are some pictures of my maiden.
VQ Twin otter flies really good. Short take offs and slow landings.
My setup is 4s 5800mah.
Motors 2814. 900kv
10x5 prop (2blade)
At the moment 60 amp esc (had them already)
Hitec servos all around.

About 15-20 min flying time.
I didn't put the bars under the wing to the fuselage.
But i didn't see any flexing wings.

Feel. Free to ask questions, and i will try to answer them in my crappy english
May 23, 2017, 06:21 PM
Rampage's Avatar
Thread OP
Hopefully they make it to the US. I really want one!
May 24, 2017, 11:43 AM
Registered User
DeLaReef123's Avatar
Hey Above, nice pictures. What type of hitech servos did you go with? I want to be sure the ones I have will fit. Also, where are the ESCs located? in the Nacelles?
May 24, 2017, 11:44 AM
Registered User
DeLaReef123's Avatar
Rampage, you can order here. Looks like they are almost in.
May 24, 2017, 07:13 PM
Registered User
Hey Reef
Ailerons, flaps: Hitec HS-81. Had to do about 2mm grinding to make them fit. (5minute job)

Elevator: Hitec HS-5485HB
Rudder: Hitec HS-325HB

Yes the esc are located in the nacelles. I had to do some soldering to extend the cables in to the fuselage.

CG was best with 56mm from leading edge.
Did you recieve your model?

May 25, 2017, 07:34 AM
Registered User
I ordered one on 5-24 They sent a note saying the container was at dock and they will be shipping after it passes customs. Sounds like I might get one from the first shipment.
May 25, 2017, 02:26 PM
Acft Attn Deficit Disorder
Cubcrazy's Avatar
I just pulled the trigger on a Twin Otter and the float set. Worst case scenario is they don't have one for me and I cancel the order. Here's hoping

Latest blog entry: From the CC Paint Shop

Quick Reply

Thread Tools