Thread Tools
Apr 21, 2017, 07:52 AM
thatjoshguy's Avatar
So if we've now confirmed that the latest Cleanflight works, you know I'm going to try Betaflight this evening... If I get time anyway.
Sign up now
to remove ads between posts
Apr 21, 2017, 12:15 PM
Registered User
Josh, keep us posted!
Yesterday, 11:43 AM
thatjoshguy's Avatar

Here are the flash settings I used:

Name: 1.PNG
Views: 1
Size: 10.6 KB

Press and hold the boot button before connecting USB and hold it down for the entire flash/verify process. when it completes, reboot by disconnecting and reconnecting, then you're good to go!

port settings:

Name: 2.PNG
Views: 1
Size: 32.9 KB

check the receiver config here:

Name: 3.PNG
Views: 3
Size: 91.6 KB

Just about everything else is your preference, but I've attached a dump of what I just configured. Stock PIDs as I didn't bring anything over, and I messed with the LEDs because I think this looks cool, but if you flash and then paste this into the CLI, press enter, then type "save" and press enter it will set all of this up. Then go crazy

f215 dump
Yesterday, 11:49 AM
thatjoshguy's Avatar
So now the big question is... anyone have any ideas on the OSD?
Yesterday, 06:49 PM
aka RCFlyer85
Irock1985's Avatar
Originally Posted by thatjoshguy
So now the big question is... anyone have any ideas on the OSD?
Have you tried enabling MSP on uart2
Today, 09:20 AM
thatjoshguy's Avatar
I mean how do you customize it?

Sent from my SAMSUNG-SM-G930A using Tapatalk

Thread Tools