X24 Integrated Flight Control System - Page 7 - RC Groups
Thread Tools
This thread is privately moderated by JimDrew, who may elect to delete unwanted replies.
Dec 07, 2017, 01:06 AM
Registered User
Quote:
Originally Posted by JimDrew
There have been no reports of any type of servo working with the X24. People have asked this question before and are now using their X24s, so I guess they work fine.
Did you mean to say "any type of servo NOT working with the X24s"?
Sign up now
to remove ads between posts
Dec 07, 2017, 11:34 AM
LOL! Yes, corrected!
Dec 08, 2017, 12:06 PM
Xpress..'s Avatar
Quote:
Originally Posted by bobmixon
Hi Jim... I intend on using the X24 with dual Futaba receivers and Hitec HSB-9381TH servos. These Hitec servos have a regenerative braking feature. Will using these servos with the X24 be an issue?
They work no problem
Dec 08, 2017, 02:42 PM
Straight from Hitec support! Thanks!
Dec 10, 2017, 09:19 PM
Registered User
bobmixon's Avatar
Quote:
Originally Posted by Xpress..
They work no problem
Awesome, thank you!

My X24 has already arrived. I'll get it configured and installed after Christmas.
Dec 19, 2017, 09:11 PM
Registered User
spookyeng's Avatar
Just placed an order for X24 Deluxe today and looking forward to getting it. A lot of great information in this thread! Thanks for all the inputs!
Dec 20, 2017, 11:04 AM
Registered User
Quote:
Originally Posted by spookyeng
Just placed an order for X24 Deluxe today and looking forward to getting it. A lot of great information in this thread! Thanks for all the inputs!
Welcome to the "Informed" .....
Dec 20, 2017, 11:23 AM
Registered User
spookyeng's Avatar
Quote:
Originally Posted by tande
Welcome to the "Informed" .....
Thanks! Already go the shipping notification. Going into a Storchschmiede 1/3.5 Storch. Build thread on Flying Giants! Talk soon guys and looking forward to following along!

Jason
Jan 04, 2018, 12:20 AM
...the battery is not too big!
Not sure if i am missing it or what, but is there any info about the flight control functions and sensor specs??
Jan 04, 2018, 09:36 AM
The manual covers all of the details for the IFCS. There are no "sensors".
Jan 04, 2018, 01:11 PM
...the battery is not too big!
Quote:
Originally Posted by JimDrew
The manual covers all of the details for the IFCS. There are no "sensors".
Hhmm, no sensors? No gyro, accelerometer, compass, or GPS module??

Are more components needed to use this unit as a functioning controller?
Manual must be read for this info??
Usually all that info is had in advertising.
This is a bit odd.
Jan 04, 2018, 11:22 PM
The X24 has never had any of these things. Perhaps you are confusing the X24 with another product?
Jan 05, 2018, 07:42 AM
Registered User
Quote:
Originally Posted by JimDrew
The X24 has never had any of these things. Perhaps you are confusing the X24 with another product?
Possibly a FrSky product ??
Jan 05, 2018, 11:34 AM
...the battery is not too big!
The only confusion here is knowing what functions the X24 will perform.

Is the X24 a navigation system for multirotors?

I only first heard of X24 a couple days ago when I looked at the ad. I wanted to learn more about it, no confusion with another product. FrSky does not make a fc that I know of.

Suppose I could read the manual, but man, a guy should be able to get enough info from the ad to a leats know what the product will do.

I am not new to the rc drone fc. Been using various ap and sport controllers for years now since the start, but you advertisement is confusing calling the X24 a 'flight controller' with no info on flight functions or hardware specs.
Jan 05, 2018, 12:02 PM
Registered User
You saw this in an ad ?? Where ?? I don’t believe XPS does any advertising.....

Here is a link for you to look at that describes what it does......

http://www.xtremepowersystems.net/products.php?cat=8

I think that the "misunderstanding" is that it claims to be "an integrated flight control system"...... clearly it's not in the usual sense of the word......

It's not a navigation system for anything.......

Again , is it possible you’re looking at someone else’s product ???

PS-- To avoid this type of confusion, maybe Jim should change the name of this product back to what it was to begin with....... "X24 channel expander"...... basically, that's really all it is......
Last edited by JuanRodriguez; Jan 05, 2018 at 12:19 PM.


Quick Reply
Message:

Thread Tools