Build Questions about Easy Star - RC Groups
Thread Tools
Oct 02, 2004, 12:20 PM
Registered User

Build Questions about Easy Star

I got the Easy Star! I'm impressed on how well design the kit is -lots of attention to detail and good instructions. It seems like a very straight forward build but because I'm really green at this (first build project) I have some questions.

Here's the first batch. All about servos.

I have JR submicro servos. The submicros are too small for the servo cavities on the sides of the fuselage. Should I get different servos or just cushion them with foam and double-sided tape until they fit snuggly?

Should I get different servos because of torque issues? The Easy Star seems like park flyer caliber in terms of torque needs but I'm not sure.
I prefer not have to buy new servos for the obvious monetary reasons but I wouldn't be opposed if it's the best thing to do.

If the right thing is to install larger servos, do I need to change the receiver? In my mind, it's clearly unnecessary but I'm not 100% certain and would like a confirmation.


Sign up now
to remove ads between posts
Oct 02, 2004, 07:33 PM
luke15's Avatar
im not completely sure about the servos but id take a guess at them being fine,wait for another reply to that,

but you wont have to get a new reciever for new servos.

Oct 03, 2004, 10:38 AM
Registered User
Servo's are fine. Best way to mount them is to screw them to a piece of 1/8 ply CA'd to back of the servo cut out (side mount the servo's). Any rcvr will work OK. A full size rcvr helps to more easily balance the plane.

Oct 05, 2004, 12:58 AM
Registered User
Thanks for the tips. I actually bought a couple of Hitech Hi-81's. These fit just fine and I'll save the sub micros for a future plane.

Now back to the build process. I noticed that the instructions do not say anything about cutting the rudder and elevators. They can't move unless I cut them off. I was just about to do this but then I thought about getting some feedback from you guys. The fact the instructions are so clear for everything else is what makes me wonder about my surgical intentions.
Oct 05, 2004, 01:20 AM
Registered User
zed's Avatar
I'm buying the easystar as well. What is the best way to secure the motor? Glue? Double-side tape?

Oct 05, 2004, 01:31 AM
Registered User
Unlike the cutting of the control surfaces, the motor mounting is covered pretty well in the instructions. I glued it with slow CA. Make sure it doesn't get inside the motor.
Oct 05, 2004, 07:38 AM
Well rested user
Peekes's Avatar
For more tips,

Procede to the foamies forum.
The biggest Thread ever on here is about the Easystar!
Plenty of people to help!

And yes, you have to cut the rudder and elevator loose!

Oct 06, 2004, 12:09 AM
Registered User
Yeah, saw those threads... I would need a whole day off from work to read all of it :-)

I'll post there to keep the tradition going.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Question Two Questions on the Easy Star Murocflyer Beginner Training Area (Aircraft-Electric) 50 Feb 16, 2006 09:47 PM
Question about Easy Star RTF Jonger1150 Beginner Training Area (Aircraft-Electric) 3 Aug 02, 2005 09:32 PM
Easy Star build questions mrX Beginner Training Area (Aircraft-Electric) 11 Jan 23, 2005 05:56 AM
Just Bought A Multiplex Easy Star, some questions... STaNgXs Foamies (Kits) 6 Sep 30, 2004 07:07 PM
Tipsy & Easy Star Questions from a Newbie... Guy Owen Beginner Training Area (Aircraft-Electric) 11 Jul 08, 2004 09:14 PM