Reptile S800 SKY SHADOW 820mm Wingspan FPV EPP Flying Wing Racer KIT or EPP - RC Groups
Thread Tools
Nov 26, 2016, 01:41 PM
Registered User
kbird's Avatar
Discussion

Reptile S800 SKY SHADOW 820mm Wingspan FPV EPP Flying Wing Racer KIT or EPP


New Bangood PNP/Kit FPV Wing

Reptile S800 SKY SHADOW 820mm Wingspan FPV

$109 PNP version includes motor, esc, flight controller, servos, camera & VTX. Coming soon
$59 kit , Preorder.



Kit: http://www.banggood.com/S800-820mm-W...p-1108279.html

EPP: http://www.banggood.com/Reptile-S800...p-1108534.html


General
Brand Name: Reptile
Item Name: S800 SKY SHADOW
Material: EPP

Dimension and Weight
Wingspan: 820mm
Overall Length: 405mm
Package Weight: 1200g
Package Size (L x W x H) : 435mm*270mm*130mm


Electronic Devices ( EPP Version)
Servo: Emax ES08A 9g*2
Motor: Sunnysky 2205 2300KV
ESC: Reptile 20A ESC
Battery: Max 1800mAh 3S(Not Included)
Propeller: 6045
Flight Controller: 3-Axis flight controller
Camera: 700TVL
Image Transmission: 200mw with antenna
Radio System: 2.4G 3CH with elevon mixing(Not Included)

Others
CG (center of gravity): 125mm behine the nose
Minimum Age Recommendation: 14+
Experience Level: Intermediate
Recommended Environment: Outdoor
Is Assembly Required: Yes
Sign up now
to remove ads between posts
Nov 27, 2016, 12:33 PM
Registered User
great new baby
perhaps the best fpv plane available and very attractive
Dec 01, 2016, 03:13 AM
Registered User
Does anyone has Photos of inside the Fuse/Cockpit ?

The Real state inside would be the deciding factor for buying this plane.
Dec 01, 2016, 09:35 AM
Registered User
FlyT's Avatar
I wrote an email to the manufacturer asking for some details regarding the fc in the PNP version and also asked for some pictures of the inside.
Dec 01, 2016, 04:22 PM
Registered User
great
Dec 01, 2016, 06:12 PM
Team WarpSquad
JoeMama's Avatar
will be interested to see how this works out. I have been just getting into flying wings and FPVing them. It would be cool to have an affordable purpose built wing. It would look a lot cooler than my hacks.

Has any one been given one to review yet or is it just only on pre order.
Dec 04, 2016, 04:34 AM
Registered User
FlyT's Avatar
I got the response from the manufacturer.
The red board of the PNP version is 75mm x 40mm in size.
And I got a picture to show. With those two we might also be able to estimate what battery would fit.
Dec 04, 2016, 01:40 PM
Registered User
the dials look like gains on a gyro, so it seems like the "flight controller" on the PNP is a gyro rather than a true flight computer like a NAZE board or something.
Dec 04, 2016, 03:17 PM
Registered User
FlyT's Avatar
Yes and it is quite big. I already ordered the PNP version. Found a very good offer for me thx to the weak pound.
I will try that board out and if it doesn't fit my needs I will throw it out and replace it with an NAZE32 that I still have in my spare box.
Dec 04, 2016, 04:02 PM
Registered User
there are enough place for pixhawck so it s great news!
Dec 06, 2016, 12:24 AM
UAS
Nice! I wonder if the GoPro fits on like the Manta
Dec 06, 2016, 04:59 PM
Registered User
FlyT's Avatar
For me it looks like it is designed that way, taht a GoPro fits there along a FPV camera.
Dec 07, 2016, 04:26 AM
Registered User
PNP preorder the other day, shipped today !!
hope it will get here soon.
Dec 20, 2016, 05:59 PM
Team WarpSquad
JoeMama's Avatar
Woo hoo I got mine today. I will try to get some pics up later. I got the Kit and it looks like it is going to be fun.

The instructions are a little light but I think it has all the important parts. It comes with a PCB and what looks like a BEC but the instructions were not fully clear.

Lots of parts, it was unexpected how many options it comes with.
Dec 21, 2016, 02:32 AM
Registered User
I think I might order this kit.

I have Sunnysky 2204 2300kv motors on hand. Plenty of 5045 quad props. And 1800 3s lipos, as well as 30a ESC's out of my PZ planes...(which I upgraded). Also have receivers, including a Lemon 7-channel stab receiver, and leftover 9g servos. I also have basic Eachine FPV stuff. So, should I be able to get up and running without having to buy anything else?

Edit - Heck with it. Just ordered it...

Anybody have a recommendation for which Taranis receiver to go with? D4R-II, or X6R?.... Double-edit... Ordered the D4R-II..
Last edited by Herrsavage; Dec 21, 2016 at 02:59 AM.


Thread Tools