Thread Tools
This thread is privately moderated by Jay B. Scott, who may elect to delete unwanted replies.
Nov 07, 2016, 06:48 PM
Registered User
Thread OP
Build Log

Finishing the Bamboo Bomber--News Flash Part 3


Here's an evolution of thought from Part 2. Just extend the logic of my solution, and you'll find that you don't even need the inner pushrod tube to go through the stab. Just screw your 2-56 metal pushrod into the inner tube, back off the tube about an inch in front of F10, and simply run the 2-56 metal pushrod through the stab. Now the hole is really small! Easy, no?
Sign up now
to remove ads between posts


Quick Reply
Message:
Thread Tools