Thread Tools
This thread is privately moderated by rcGman, who may elect to delete unwanted replies.
Sep 11, 2016, 11:01 PM
Trader Rating: 72
Soaring in Sol Cal
rcGman's Avatar
Thread OP

Custom Cut - Clear Vinyl Servo Cover Tape


Over the weekend, I was asked to cut several more sets of Clear Vinyl Servo Cover Tape.

So, with the cutter and templates all setup, I made 10 additional sets at the same time.

These will fit all the Xplorer series of planes or any other plane with similar size servo covers.



I am asking $8 shipped for a set of 6 pieces that way you have 2 spares.

Send me a message with the total number of sets you want and I will send you my paypal info.


The vinyl I use is a high quality thin material at 60 microns thickness. UV protected with an outdoor rating of 7 years. The vinyl is clear

Size of cover tape:

Outside tape edge (Square) - 2.5" (63.44mm)
Inside Hole (Square) - 1.65" (41.9mm)

I have a mini-how-to instruction set with several pictures on my RcGroups blog which might help some people out.

Instruction Link Here:

Last edited by rcGman; Dec 07, 2016 at 01:12 AM. Reason: Added Cover Tape size
Sign up now
to remove ads between posts

Quick Reply
Thread Tools