Micro Navigation Light Kit - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Aug 17, 2016, 09:36 PM
"Is That a Drone"
ebolton92's Avatar
New Product

Micro Navigation Light Kit


Here is my new navigation light kit, this kit was designed/developed and assembled by myself.

The light controller was designed for 2s lipo UMX size planes so the footprint of the circuit board is small (.65 x .775 inches, pictured on a quarter) in order to keep weight to a minimum.

The kit has 7 leds:
1 solid red navigation light
1 solid green navigation light
2 white strobe lights
2 white landing lights
1 dual function tail light that comes on solid but also strobes with the other strobe lights

The unit plugs directly into the xport/gear(5) channel on the "brick" (4pin jst-sh connector installed) and has 4 modes which can utilize either a 4 position switch or a 2 position switch (which is automatically detected during calibration) to change between the modes.

The first mode all lights are off.

In the second mode just the solid lights and strobe lights turn on (no landing lights).

The third mode adds the 2 landing lights.

In the fourth mode the landing lights wigwag back and forth alternating between the left landing light and the right landing light.

These lights have been very closely modeled after the cub crafters carbon cub navigation light package.

The kit is pictured on my eflite umx j3 cub.

Wire lengths are:
15" for the wing lights
8" for the landing lights
16" for the tail light

The cost is $25 + shipping


Please forgive me as I do not currently have a website
To place an order please send me a message
Last edited by ebolton92; Aug 17, 2017 at 10:31 AM.
Sign up now
to remove ads between posts
Aug 30, 2016, 05:34 PM
"Is That a Drone"
ebolton92's Avatar
Micro Navigation Light Kit on UMX J3 Cub (4 min 33 sec)
Aug 30, 2016, 09:24 PM
"Is That a Drone"
ebolton92's Avatar
This video will have to do until I can get a better quality video

Micro Navigation Light Kit at Night (0 min 43 sec)
Sep 02, 2016, 12:23 AM
Regurgitation Utensil.
xanuser's Avatar
Very nice!
How much does the little board weigh bare?
Sep 02, 2016, 01:58 AM
"Is That a Drone"
ebolton92's Avatar
Quote:
Originally Posted by xanuser
Very nice!
How much does the little board weigh bare?
An empty board weighs between .5-1 gram (the only scale I have is a postal scale but it doesn't have fine resolution) the whole set weighs about 4-5 grams.

I will be getting a more precise scale soon and when I do I will update the info but for now it gives you an idea of the weight.
Aug 17, 2017, 12:37 AM
Registered User
Hi! Just saw the new post ( and new price) ..on the older post i just ask for 2 set of leds..how i can do so?


Thread Tools