Thread Tools
Jul 26, 2016, 03:01 PM
scratchbuilder
Thomas B.'s Avatar
Thread OP
Build Log

KungFu Depron Combat Wing


KungFu is a KFm2 Depron plank for streamer combat:
Modell AVIATOR: Downloadplanmodell KungFu (2 min 39 sec)

span 70cm. 3s, 1000mAh lipo
Sign up now
to remove ads between posts
Jul 26, 2016, 03:02 PM
scratchbuilder
Thomas B.'s Avatar
Thread OP

free download


Free download plan is here:
http://modell-aviator.de/files/av091...lan_kungfu.pdf
Jul 26, 2016, 09:13 PM
Slopeosapien
jonesymj's Avatar
Aww, jeez Thomas! Cut it out! Now I have another one I have to build!

Looks really awesome... I'm in!

Edit: I see it's tiled, but is that tiled for A4 (Europe) or Letter for those of us across the pond?
Jul 26, 2016, 11:15 PM
flyin' fool
goldguy's Avatar
I'm still trying to get 'Eddie' airborne.
Jul 27, 2016, 01:31 AM
Slopeosapien
jonesymj's Avatar
Uh huh... must be trying pretty hard! It's tough gluing all 11 pieces of foam together hahaha! :-P

You know me, Frank... It's a plank. I must have one!
Jul 27, 2016, 04:14 AM
watch your head
First of all, that little thing is a lot of fun. Very easy to build.
I build a couple of these birds from the handpainted preplan.

Here we had fun with four of them:
KungfuCombat Nr. 2 (6 min 34 sec)


I did scan the little pilot drawn by Thomas and made some coloring.
Maybe someone likes to have it.
Jul 27, 2016, 11:19 AM
Ken's CAD Models
dz1sfb's Avatar
Looking good Thomas!

Ken
Jul 27, 2016, 03:25 PM
scratchbuilder
Thomas B.'s Avatar
Thread OP
The tiled plan is A4.
video:
KungFu Aircombat - Treffer und Kollision (2 min 4 sec)
Jul 27, 2016, 04:58 PM
Ken's CAD Models
dz1sfb's Avatar
Specifications and equipment used?

Ken
Jul 27, 2016, 05:35 PM
Careful,.. confident,.. CRASH!
Dukejet's Avatar
Cool! This one deserves a thread of it's own! well done Thomas. I have completed mine with full canopy and cowling. Pics soon....
Jul 27, 2016, 05:47 PM
flyin' fool
goldguy's Avatar
OK Mike, I'm going to start mine tomorrow in EPP.
Jul 27, 2016, 06:51 PM
Jack
jackerbes's Avatar
Quote:
Originally Posted by jonesymj
Aww, jeez Thomas! Cut it out! Now I have another one I have to build!

Looks really awesome... I'm in!

Edit: I see it's tiled, but is that tiled for A4 (Europe) or Letter for those of us across the pond?
If you look at the properties of the *.pdf file it describes the size of the paper as A4, Portrait (8.27 × 11.69 inch) so that would be on pages that are slightly narrower than our Letter sized (8.5" x 11") paper.

If you print it on legal sized paper (8.5" x 14") it should work fine as is as long as you make sure scaling is off on your printer and margins are at their minimums.

You can see the layout of the tiled pages on page 5

Jack
Jul 28, 2016, 04:36 AM
scratchbuilder
Thomas B.'s Avatar
Thread OP

Specs


Span is 70cm, weight around 300g with battery.
Motor: Turnigy DST 1200
Battery 3s, 1000mAh
Prop 7x6
Servos: 2x 7-9g


Quick Reply
Message:

Thread Tools