Near by and for sale cheap!

https://www.rcgroups.com/forums/show....php?t=2703265

Near by and for sale cheap! (OK, nearby anyway)

http://www.flyinggiants.com/forums/s...96#post2554750

This stand is made by Ronnie Garris and was bought at Perry several years ago.

I am using other stands and this sits without much use, so it is time to let it go to a better home.

I'd be happy to send some actual pics, please see advert below for detailed information.

For Sale: $90
(retail for $140+shipping)

https://www.rcgroups.com/forums/show....php?t=2464427

This has been a great stand and will comfortably fit most anything that is flying in the Atlanta area (under 40%). Comes with castors

Located in Brookhaven.

If that would hold up my Sopwith, I want it!

The biggest I've used is with my p47, about 26-30 lbs.
I am more careful with the big ones and really crank down the hardware tight with heavies.

I'd be happy to show you in person before any commitment.

Not sure what you mean by crank down, but I'd be down for another lunch hamburger down your way anytime.

referring to the little black knobs that tighten and loosen each joint for adjustment. There are 4 on the front that adjust the width and height of the arms, then two on each end to adjust the cradle. For heavies, I really put a lot of torque into tightening the four front bolts.

I will walk you through it in person in about 30 seconds from collapsed to fully set up.

I will likely be up in the neighborhood at the end of the week, I'll email you when I know my schedule.

For Ron...here is a Space Walker

http://www.flyinggiants.com/forums/s...d.php?t=202499

Lol

That one is on my todo list! The kit is sitting on the shelf waiting for me.

On a more serious note, these seem popular around the club, so someone should grab this one!

https://www.rcgroups.com/forums/show...0#post36662655

Someone local really ought to get this ship back in the air...
https://www.flyinggiants.com/forums/...d.php?t=214362

Looks like a great deal! Pilot RC is good stuff.

But, I just bought another 35cc EF airframe at Joe Nall. (For even less)

How much does an EME 70cc go for these days?

Here's another for all you fuel-phobic pilots out there.

https://www.rcgroups.com/forums/show...-Flight-83-MXS

For the non-fuel-phobic pilots: https://www.flyinggiants.com/forums/...d.php?t=216354

I am having trouble resisting this one myself... but I have to sell one or two cubs before buying another

...but with no comments of condition, I do have some concerns when seeing a 40% cub for $275. The pricing makes me think I am buying someones problems.