Thread Tools
Jul 05, 2016, 07:49 PM
Retired CAD guy
birdofplay's Avatar
Discussion

F22 in MPF a 1 sheeter


For some time now I have been offering Ottos'
Giant F22 scaled down to 9mm Depron at around 36" span.

Now that Depron is no longer available
I have scaled it back a little more to fit on ONE SHEET of MPF !

I've never flown an F22 foamy that was not a great flier.
Free plans below in a 24 x 48 Pdf.

Although I have not tried to skin it yet I have developed Skins for the front Top and Bottom sides.
Those can be seen in my CAD Screen grab and in the pdf I've furnished.
Pix are just above that PDF

This will be available on my site for a reasonable price as MPF is cheaper than Depron.
http://www.hoosiercutoutservice.com/planes/bop.htm

If there is interest in the Skinned Canopy and nose parts
I will make them available as well.

Best of luck with your builds and maiden.

Bob
Hoosier Cutout Service
Last edited by birdofplay; Jul 05, 2016 at 07:58 PM.
Sign up now
to remove ads between posts
Aug 29, 2016, 04:39 AM
Registered User
Bob, I purchased one of your F-22 MPF kits, it arrived 8/27 in perfect shape. Thank you. I was wondering if you can tell me the location of the CG. Rick
Aug 29, 2016, 06:31 AM
Retired CAD guy
birdofplay's Avatar
I fly mine at the wing fuse breakor a little further back.

But be aware that an aft cg might not react as well "Motor Off" as it does "Motor On"
because of the thrust vectoring effect we get with power on.

I've found this characteristic on a lot of my Prop In Slot Jets.
F-15, F-22, Mig29

My 1st indication of this was when gliding in for a landing it did not want to turn to
the base leg. A little power and it came around.

Lately I figure just leave some power on even when landing.
They slow up quickly IMHO so avoid the drama with a little power.

I'd enjoy some pix of your build and a vid , if possible, of a flight.


Best

Bob
Old Sep 07, 2016, 01:13 PM
G.T
A moderator felt this post violated the following rule: Cross-posting. It is temporarily hidden while G.T edits it.
Old Sep 07, 2016, 01:13 PM
G.T
A moderator felt this post violated the following rule: Cross-posting. It is temporarily hidden while G.T edits it.


Thread Tools