How to make a CD-ROM Motor from start to end? - RC Groups
Thread Tools
Aug 30, 2004, 09:15 AM
Registered User

How to make a CD-ROM Motor from start to end?

I need a Link to article that explains from start to end how to make my own CD-ROM Motor?

If you can add some tips and hits it'll be great !!!

Maayan Goren
Sign up now
to remove ads between posts
Aug 30, 2004, 11:04 AM
Registered User
RobDog's Avatar

A few more details here....

Are you asking for instructions on how to assemble a kit or scratch build a motor from an existing Cd-Rom?

For assembly, goto . It's really easy to do, check it out.

Aug 30, 2004, 11:21 AM
Registered User
I want to make it from my own CD-Rom Motor(FREE) !

I saw that there is peoples that didn't rewound they're wires, they just used the stock wind! What do you think?

Is there a Online shop that can ship to Israel 0.4mm enamel wires?(I can't find it-Hope I will)


Aug 30, 2004, 05:51 PM
homo ludens modellisticus
Ron van Sommeren's Avatar
I give up, I've given you about 10 links to cd-rom conversion manuals/homepages, twice even, yet apparantly you choose to ignore them. Good luck.
Aug 30, 2004, 06:09 PM
Registered User
Sry Ron van Sommeren I guess that I haven't seen your reply but now i looked back and saw your interesting information!

I still need more tips and hits !


Aug 30, 2004, 06:14 PM
homo ludens modellisticus
Ron van Sommeren's Avatar
Ok, problem solved You have plenty of reading to do now, no need for more tips and hints.

Groeten Ron
Aug 30, 2004, 06:20 PM
"I passed on the kool-aid"

The stock winding is usually...

too thin of wire and too many winds to really be useful. You really need to rewind it and put new magnets in it to get any kind of substantial performance from it and have the benefits of better efficiency. Maybe your's is different though, and comes stock wound for a mini speed wing...hehe. Good luck.
Aug 30, 2004, 06:20 PM
Registered User
Again Thanks Ron van Sommeren - I saw the links and i guess it'll take few days to read this !(And to work!!)

Quick Reply

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Stock CD-Rom motor from GoBrushless, help... KillerCut Power Systems 7 Apr 10, 2005 11:15 PM
How do i remove the cd-rom motor from metal plate? Ynksrock510 Power Systems 2 Sep 10, 2004 09:35 PM
How to Convert a CD ROM motor arhude Power Systems 5 Aug 22, 2004 06:17 PM
Question how to convert to cd rom motor TBrew 3D Flying 4 Jul 24, 2004 04:08 PM
How do I take this CD rom motor apart? Sal C Power Systems 8 Jan 30, 2004 03:16 AM