Shop our Airplanes Products Drone Products Sales
Thread Tools
Sep 04, 2016, 09:14 PM
Born for RC Fanatics
Thanks Ronny5 for sharing this video.
Testing new Stuff in racing (2 min 29 sec)
Sign up now
to remove ads between posts
Sep 05, 2016, 05:55 PM
TBS Crossfire or DragonLink?
What is the first SETTINGS we have to change to get MORE "Vivid" colors?
It is very washed and low colors?

It should be the first and foremost to change when one gets this CMOS camera!
Sep 07, 2016, 11:27 PM
Born for RC Fanatics
Thanks Painless360 for sharing this video.
RC Reviews: RunCam EAGLE FPV 16:9 Camera (7 min 50 sec)
Sep 10, 2016, 05:03 AM
Registered User
Runcam Eagle 4:3 CCD has been released on Banggood.

Same price as CMOS.

Link: http://bit.ly/2cgYy9q
Sep 11, 2016, 06:33 AM
Registered User
Nice image and mounting system but latency still too high for racers. Way too expensive also..

I had high hopes for this cam but I chose to go with the Foxeer XAT1200 instead, yes it's a Cmos cam which has its own characteristics but the latency is same (or even lower) than the benchmark hs1177... and it only cost me $37 USD.


Sorry RunCam, but you will have to do a lot better than that to part me of my money.
Sep 12, 2016, 04:38 AM
Wait...what?
gbmarsh's Avatar
Quote:
Originally Posted by downloader9
Runcam Eagle 4:3 CCD has been released on Banggood.

Same price as CMOS.

Link: http://bit.ly/2cgYy9q
It's the same camera, BG is notorious for getting their descriptions wrong.... or just making stuff up... or lying
Sep 12, 2016, 11:02 PM
Born for RC Fanatics
The Eagle has two 16:9 and 4:3 ratios now.
Buy from here http://shop.runcam.com/runcam-eagle/
The effect compared video:
RunCam Eagle 4:3 VS 16:9 (2 min 11 sec)
Sep 12, 2016, 11:27 PM
Registered User
Quote:
Originally Posted by gbmarsh
It's the same camera, BG is notorious for getting their descriptions wrong.... or just making stuff up... or lying
It's not.
Sep 13, 2016, 12:39 AM
Wait...what?
gbmarsh's Avatar
Quote:
Originally Posted by downloader9
It's not.
Clearly it is, as stated by RunCam themselves only in 4:3 format instead of 16:9.... it's NOT a CCD camera as claimed on Banggood.com. Still the same CMOS sensor at a very high price.
Sep 19, 2016, 09:11 PM
Born for RC Fanatics
Change the stock setting for better effect. Thanks faris.FPV for sharing!
Runcam Eagle 16:9 Best Settings for FPV - FT48X 48 Channel adjustable VTX (3 min 17 sec)
Sep 19, 2016, 09:36 PM
TBS Crossfire or DragonLink?
Quote:
Originally Posted by RunCam
Change the stock setting for better effect. Thanks faris.FPV for sharing!https://www.youtube.com/watch?v=MLK-jq88DRQ
That video is still faded out and washed out?
Maybe its the DVR recording....

can someone record the actual DOMv3 in action from the outside...
I know it maybe difficult recording from the outside, but it will
give us the 'actual' sight of the EAGLE 16:9 cam through the goggles!!!!

These reviews are biased as most of you all got these for free..

if someone can recorde from the outside similiar to the video down below 0:49



0:49
FatShark Dominator SE - First Look (0 min 58 sec)
Sep 23, 2016, 09:36 AM
kgb
kgb
Registered User
I just received my new Runcam eagle. I had it connected and it was working ok. I mounted the brackets and tightened the screw and upon connection, it stopped working and I could not get any images out of it. I think this camera is defective. I've sent an e-mail to Runcam and hopefully, I will get a reply from them soon.
Sep 23, 2016, 11:18 AM
Registered User
Quote:
Originally Posted by kgb
I just received my new Runcam eagle. I had it connected and it was working ok. I mounted the brackets and tightened the screw and upon connection, it stopped working and I could not get any images out of it. I think this camera is defective. I've sent an e-mail to Runcam and hopefully, I will get a reply from them soon.
I'd guess you might have screwed the screws in too far and shorted the board? ..... IF it's anything like my HS1177. Very bad design, if that is what has happened.
Sep 23, 2016, 08:52 PM
kgb
kgb
Registered User
Quote:
Originally Posted by Ari33
I'd guess you might have screwed the screws in too far and shorted the board? ..... IF it's anything like my HS1177. Very bad design, if that is what has happened.
I hope not. I have 4 Runcam swifts and never had any issues, I am still waiting to hear from Runcam support.
Sep 25, 2016, 07:24 AM
Registered User
are any racing / freestyle FPV pilots using these without issue with the small added latency? As I understand it there is about 15-20ms more than the typical hs1177 setup...