Thread Tools
Jun 06, 2016, 11:17 PM
Registered User
Thread OP
Discussion

Flysky RX with 10 channel PPM / S-BUS, support failsafe


Flysky RX with 10 channel PPM / S-BUS
Compatible with FS-i6 10 channels mode
http://store.fpvbox.com/index.php?ro...&product_id=93

10 channels PPM and S-Bus( D-Bus ) output
Weight: 3 grams
Size: 23mm*26mm
This is for compatibility with CC3D, APM, PixHawk, SPRacing F3, Naze32, DJI flight controllers etc.







----------------------------------------------------------------------------------------------------------------------------------------------------------------
Update new version
Mini radio receiver compatible with FlySky i6/i10 AFHDS 2A with 10channel PPM/S-BUS
http://store.fpvbox.com/index.php?ro...product_id=116



Weight < less 1 gram
10CH PPM
10CH S-BUS
Support failsafe

Size: 12mm*18mm
Weight: less 1 gram
This is for compatibility with CC3D, APM, PixHawk, SPRacing F3, Naze32, DJI flight controllers etc.





Last edited by udoor; Mar 18, 2017 at 12:42 AM.
Sign up now
to remove ads between posts
Jun 24, 2016, 11:34 AM
aka RCFlyer85
Irock1985's Avatar
How's the range compared to the ia6B receiver?
Last edited by Irock1985; Jun 24, 2016 at 11:43 AM.
Jun 25, 2016, 09:02 AM
Registered User

range


is the range any good?
Jun 30, 2016, 03:54 AM
Registered User
Thread OP
It's time to say goodbye to binding cable
FPVBOX 10Channel receiver binding with Flysky i6 (0 min 12 sec)
Jun 30, 2016, 04:01 AM
Registered User
Thread OP
Quote:
Originally Posted by Irock1985
How's the range compared to the ia6B receiver?
It is still being tested and no different than iA6B
Jun 30, 2016, 09:14 AM
aka RCFlyer85
Irock1985's Avatar
Quote:
Originally Posted by udoor
It is still being tested and no different than iA6B
What's still being tested might I ask as I've already ordered 2 units?

Also will they come with an antenna soldered on?
Jun 30, 2016, 08:23 PM
Registered User
Thread OP
Quote:
Originally Posted by Irock1985
What's still being tested might I ask as I've already ordered 2 units?

Also will they come with an antenna soldered on?
Yes, they come with the antenna
I means the longer distances being tested
Jul 05, 2016, 08:58 AM
Registered User
Are these shipping yet? Any US sellers?
Jul 05, 2016, 12:14 PM
aka RCFlyer85
Irock1985's Avatar
Quote:
Originally Posted by sk8mdw
Are these shipping yet? Any US sellers?
I pm'd him about my order and he assured me it has been shipped so hopefully I have it in soon to test...
Jul 05, 2016, 12:55 PM
Registered User
Quote:
Originally Posted by Irock1985
I pm'd him about my order and he assured me it has been shipped so hopefully I have it in soon to test...
Cool, looking forward to your feedback. Interested in a couple of these for small builds where space is premium.
Jul 06, 2016, 01:06 PM
Registered User
RadMulRot's Avatar
Ordered 3 of them. Finally a small i/s/dbus receiver!
If i still want to cut it smaller, could I cut this pcb off which seems to be on board antenna? Also going to desolder the pins and likely cutting the sides off as well. (if possible). I want it as small and light as it gets. The smaller the better.
Jul 06, 2016, 01:23 PM
Registered User
I went ahead and ordered a couple as well. I hope they perform as well or better than the ia6b.
Jul 06, 2016, 02:04 PM
Registered User
RadMulRot's Avatar
We need to figure out the battery voltage telemetry mod for this.
Jul 06, 2016, 05:07 PM
aka RCFlyer85
Irock1985's Avatar
Hoping for the best with these
Jul 06, 2016, 08:07 PM
Registered User
Thread OP
Quote:
Originally Posted by Moosivaras
We need to figure out the battery voltage telemetry mod for this.
We will support the feature, RX need to add a Power Amplifier.
so the Flysky TX can receive the voltage signal at a greater range .
It will take some time to develop a new hardware.
Thank you for your attention and support


Quick Reply
Message:

Thread Tools