Shop our Airplanes Products Drone Products Sales
Thread Tools
Old Aug 25, 2004, 01:21 AM
Bat21 is offline
Find More Posts by Bat21
Registered User

Himax gearmotor 3 mm Collet Style Aluminum Prop Adapter


Anyone know any tricks to keep the collet from getting loose during flight and flying off? I've tightened it to the point I was afraid of stripping the aluminum threads but it still flys off after a while. Thanks
-------
Bat21
Sign up now
to remove ads between posts
Old Aug 25, 2004, 12:29 PM
olmod is offline
Find More Posts by olmod
Good Better Best quest.
olmod's Avatar

try


a piece of 320 grade wet and dry sanding paper wrapped around the shaft and score it along the shaft not around, till you see that the high polish is well marked up, spray with some contact cleaner or similar to get rid of any sillicone from the paper and any oils, check inside the alloy bore on the prop adaptor and clean with a pipe cleaner ,when fitting the adaptor the taper should have just a oil smear and also the thread,you should find that your problem is solved , check your speed control that its set on soft or no brake, as sudden braking can make the problem worse.
Old Aug 25, 2004, 12:48 PM
mjdee14 is offline
Find More Posts by mjdee14
Registered User
mjdee14's Avatar
I had a problem with mine also...I believe it is a 2mm shaft on the gear. I finally fixed it by buying a 2mm collet from Hobby Lobby that has a nut.....never had a problem since.

They also have a neat kit that slips over the collet nut, then you attache a realistic looking prop Hub that looks like a Hamilton standard prop dome. real neat for war birds....or to just hide the nut.... The new collet is even tight going on...but the hub on my Himax is 2mm. I had it at the hoppy shop to make sure.
Old Aug 25, 2004, 04:19 PM
FRAMEDNLVS is offline
Find More Posts by FRAMEDNLVS
Registered User
gone fishing
Last edited by FRAMEDNLVS; Aug 11, 2006 at 01:08 AM.
Old Aug 25, 2004, 04:36 PM
Chuck is offline
Find More Posts by Chuck
Balsa to the Wall
Chuck's Avatar
Try a little Blue LocTite between shaft and collett.

Chuck
Old Aug 25, 2004, 04:38 PM
Bat21 is offline
Find More Posts by Bat21
Registered User
Hi olmod and mjdee14. Thanks for your replies. The sanding paper idea is good. My Himax gearmotor is the HG2025-4266. I measured the gear shaft diameter and it is 3.048mm (.120"). Very odd-ball. Even more odd-ball is the prop shaft diameter of 4.674mm (.184"). The length of the prop shaft is such that a props hub thickness can't be much over 1/4 inch. Most GWS props have a hub thickness of 9/16". Oh well. I checked the Hobby-Lobby website and they don't have any prop shaft adapters for 3mm shafts. 3.2mm was the closest.
--------
Bat21
Old Aug 25, 2004, 09:43 PM
olmod is offline
Find More Posts by olmod
Good Better Best quest.
olmod's Avatar
Try www.ecubedrc.com they have them for most i had to buy some recently myself.
Old Aug 30, 2004, 10:15 AM
mjdee14 is offline
Find More Posts by mjdee14
Registered User
mjdee14's Avatar
On another post someone had the same problem...and they called Max products...they sent out another collet. I just called and they are sending me another one also...

I haven't measured the shaft...and you may be right its probably 3mm not 2 like I thought...but Hobby Lobby had one in stock that fit perfectly and tightens down great. It may not be in the catalog...as the guy at the counter (I live right by them) gave me. it must have been the 3.3...it was too loose..he came up with 3mm (I guess) and it fit great...

I need to see if I kept the package.....and I might be able to give you a part number...

I'll look when I get home.....
Old Aug 30, 2004, 04:51 PM
mjdee14 is offline
Find More Posts by mjdee14
Registered User
mjdee14's Avatar
Just measured the shaft and it is 3MM...I got new 3MM from Hobby Lobby and it works great , has a nut instead of the dome screw. i also called Maz producxts and they are sending me another collet..

Mike
Old Sep 02, 2004, 11:44 PM
huck328 is offline
Find More Posts by huck328
Registered User
huck328's Avatar
Thanks olmod! I got my first Himax motor and APC props last week and I've been trying like nuts to get the adapter that comes with the Himax to get tight on there. The sandpaper trick worked like a charm.
Old Sep 03, 2004, 12:53 AM
FRAMEDNLVS is offline
Find More Posts by FRAMEDNLVS
Registered User
gone fishing
Last edited by FRAMEDNLVS; Aug 11, 2006 at 01:09 AM.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale 30 mm aluminum spinners with 3 mm collet Ted U Aircraft - General - Miscellaneous (FS/W) 1 Aug 20, 2006 08:04 PM
Discussion Where can I find a set-screw style 3mm prop adapter? PerfectStranger Electric Plane Talk 3 May 05, 2006 06:39 AM
Sold F/S Himax 2025-3200/ GWS GB/Mount Saver/Prop adapter combo Aobid Aircraft - Electric - Power Systems (FS/W) 4 Dec 13, 2005 08:08 AM
30mm spinner w/2.3 mm collet...can it be drilled to 3.2mm??? Joe Ford Electric Plane Talk 3 Jun 02, 2004 11:41 PM
Collet Style Prop Adapter or Spinner SteveR Sport Planes 3 Mar 03, 2002 11:03 PM