Shrike Build Suggestion - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Aug 13, 2004, 12:11 AM
Registered User

Shrike Build Suggestion

The carbon tail boom on the Shrike can produce some nasty slivers back by where the tail pins are glued into place. BE CAREFUL.. When you CA or Epoxy the tail pins in this should tack any fibers that are loose due to the holes being drilled into the boom. If you paint your boom this will also help eliminate this situation.

Another thing I'd suggest doing on the tail boom is wrapping the back 3/4" with thread. The thread can be secured with CA. You want a wrap that looks similar to those used on fishing rods to hold the guides to the rod blank.

The purpose of this thread wrap is to help ward off the potential for the boom splitting aft of the tail pins. This can happen in a particularly bad landing.

Another modeler suggested gluing a three inch long fiberglass, wood or aluminum rod in the back of the boom. I have no doubt that this would work quite well but so will the thread wrap and it will be much lighter.

Now, where are all those Shrike kits that were sold? I've been waiting for some photos and flight reports. Don't let them gather dust under your bench. They don't fly with a darn in the box.

Sign up now
to remove ads between posts
Aug 13, 2004, 01:47 AM
Insert custom witicism
Jeff Charlot's Avatar
I've been waiting for someone to come out with either a build thread or a flight report also. I've never seen a shrike and I'd like to see some in flight shots and real world flight reports.

Aug 16, 2004, 06:38 PM
slopetrash wannabe
Yeah, what Jeff said
Aug 16, 2004, 06:48 PM
Fun ain't cheap!
droydx's Avatar
The Shrike is next up in my "build line" after I finish the Super Tucano Pss ship. I'll take some pics as I build it up. Good point on the carbon fiber, I always wrap booms and even push rods if I think they might take a side load, even if accidently.
Aug 16, 2004, 07:14 PM
Registered User
Ib Jensen's Avatar
Hi Ed,

I will either wrap the end with thread or 3/4 oz glass. I bagged One set of fins with 1 oz Kevlar because they were sanded way to thin. They cane out beautiful ad not too much heavier but strong as the dickens. I will be doing the wings tonight and may have one set bagged by the Thursday meeting. I will take some pictures tonight and send them in. I ordered the digital servos but the are temporarily out of stock and I don't think they will make it by next weekend but the wind forecast isn't good for the next week either.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Shrike Build Question isoarthenland Slope 56 Aug 10, 2007 09:27 PM
Discussion A "First" DLG build suggestion? T_om Hand Launch 35 Nov 16, 2006 06:10 AM
Aerocommander Shrike build jzanutto 1/2A Planes 19 Sep 18, 2005 12:15 PM
Shrike Build Correction SkyKing RC Slope 4 Dec 11, 2004 11:13 PM