Problem With My Slow Stick Motor! Help People Dont Understand! - RC Groups
Thread Tools
Aug 08, 2004, 12:19 AM
Registered User
Zachary's Avatar

Problem With My Slow Stick Motor! Help People Dont Understand!

OK, i had a gws eps300c with a gear "D" on it....i used an 11x8 prop and it worked fine, i just bought eps350c with a gear "C"....can i use the same prop? i think all its doing is spinning more rotations or somethin.....can somebody tell me? i bought alot of 1180 props i dont wana have to switch..

Last edited by Mark Wood; Aug 08, 2004 at 06:03 PM.
Sign up now
to remove ads between posts
Aug 08, 2004, 12:26 AM
Registered User
Kyle G.'s Avatar
no no no! dont use an 11-8 on a 350c on "C" gearing! you will over amp the motor. even a 10-8 is too much on a 350c (i know from experience) a 9 inch prop should work nicely i think. with the lower gearing it takes more work from the motor to get the prop spinning. thats why bigger props wont work because they take more effort to spin from their larger mass. thats why smaller props will work better on lower gearing
Aug 08, 2004, 06:34 PM
Frequent Flyer
wattsup_kz's Avatar
Look here if you want to know how any prop/gearing combo would work on the 350.
Good luck!
Last edited by wattsup_kz; Aug 08, 2004 at 06:37 PM.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Need Help with My Slow Stick, it got issues WannaFly_06 Beginner Training Area (Aircraft-Electric) 65 Dec 17, 2006 07:02 PM
Discussion Some Help with my Slow Stick Ray-Ban Aerial Photography 52 Dec 14, 2006 07:54 PM
Is this a problem with my Slow Stick? Jason Paul Beginner Training Area (Aircraft-Electric) 26 May 11, 2005 08:29 AM
Need help with my Slow Stick CRABBYFLYER Beginner Training Area (Aircraft-Electric) 13 Apr 18, 2004 08:58 PM
Help with my Slow Stick Flybyguy Modeling Science 6 Jul 29, 2003 05:07 PM