Thread Tools
Feb 13, 2016, 03:42 PM
Registered User
Thread OP

IN NEED OF HELP: quad drift and trim issue

Hello everyone. I am having an issue with my quad drifting to the left and when I trim it on my radio to the right the drift to the left become even worse. I trim it back to centre and it does nothing.

craft -
minion 218
betaflight 2.3.5 (I added pic of FC as I don't know brand and I think its a clone)
ZWT 18 A ESC's
EMAX 2204 2300KV

9XR PRO running stock firmware

I had an accident and just replaced motors and FC...

As a side note- I have created LED board for the minion. its a 3d builder file and I cant seem to upload it

Thanks for any help
Sign up now
to remove ads between posts
Feb 13, 2016, 04:25 PM
Registered User
Thread OP


this issue is occurring in horizon mode
Feb 15, 2016, 08:26 AM
Oldgazer's Avatar
Calibrate the accelerometers.
Feb 15, 2016, 08:59 AM
Team AlienWarpSquad
READ the F WIKI to start.
Could also be you did not go through all the setup basics.
Stick centers?

Quick Reply

Thread Tools