I have noticed the GPS coordinates displayed on the video link are different then those displayed on Tower when used with the Dragonlink. Any ideas as to what could be causing this?

Thanks in advance, Calvin

Originally Posted by SuperCal

I have noticed the GPS coordinates displayed on the video link are different then those displayed on Tower when used with the Dragonlink. Any ideas as to what could be causing this?

Thanks in advance, Calvin

Are you sure they are different or are they just in a different format? The format used is a function of the settings in the OSD and Tower so it's entirely possible that they are set to display in different formats.

did i download the right file it say its for APM but im using vector with dragon link. im not seeing any thing that says its for vector /dragon link. im stuck on connect your ardino mega 2560

Originally Posted by Danthemanfpv

did i download the right file it say its for APM but im using vector with dragon link. im not seeing any thing that says its for vector /dragon link. im stuck on connect your ardino mega 2560

If you mean the instructions for setup they are located here: http://fpvpro.com/dragonlink/support...elemetrysetup/
and here: http://fpvpro.com/dragonlink/support...elemetrysetup/

If anybody is interested:
I wrote an Arduino Sketch to send the Vector telemetry over JETI EX to Jeti Transmitters.
See GitHub: https://github.com/geins/VOT2EX

Feel free to tinker and refine!

Cheers, Ralf

Hi everyone,is this possible and will it work please,im intending having a bluetooth 433 grond modual connected to my tablet with tower on it and A 433 air modual connected to the micro vector by the uart port,will this give me telemetry on the tablet in particular GPS coordinates,many thank's in advance,Marty.

Sounds like Mavlink is coming based on Eagletree mention on the rc groups podcast. They did not say when it will be released however. Would be nice for sure to have.

I'm thinking it'll be a new product... Doubt they will keep current hardware when it's taking this long...

Originally Posted by Jmel

I'm thinking it'll be a new product... Doubt they will keep current hardware when it's taking this long...

Maybe but it’s just simple software so no need to.

Originally Posted by rpstar

Sounds like Mavlink is coming based on Eagletree mention on the rc groups podcast. They did not say when it will be released however. Would be nice for sure to have.

That's interesting - where can I find the podcast?

Originally Posted by Flynn203

That's interesting - where can I find the podcast?

Look at the latest rcgroups one. Easiest to find on youtube under rcgroups.

Looking for help, on how to connect a DragonLink 1watt TX to the Vector??

Originally Posted by BisonBison

Looking for help, on how to connect a DragonLink 1watt TX to the Vector??

Are you asking about Vector Telemetry or SBUS?

Looking for a schematic for SBUS......

S-Bus is a regular servo connection, ground on one end, red in the middle, and signal on the other side. S-Bus output can be assigned to almost any pin per the GUI and instructions.

Check out DL's instruction manuals they will help a lot.

Installation:

http://www.dragonlinkrc.com/instruct...ompletesystem/

Vector Telemetry:

http://www.dragonlinkrc.com/instruct...ctortelemetry/