Hubsan X4 H501C - Page 4 - RC Groups
Thread Tools
Jul 21, 2016, 10:33 PM
Registered User
Follow me function are not mentioned.

Hubsan H501C Main features:

Built in 1080P HD camera;
GPS positioning system;
GPS return to home (RTH) and failsafe mode;
Powerful brushless motors (KV1650 PM1806);
Headless flight mode;
Altitude hold mode: Precise position and altitude holding;
Up to 20 minutes flight time (7.4V 2700mAh 10C LiPo-Battery);
Up to 300 meters control range;
Self-tightening propellers;
Battery protection module: Protect and prevent overcharging the battery;
With multi-color LED lights.
Last edited by Hobbyfans; Jul 22, 2016 at 04:28 AM.
Sign up now
to remove ads between posts
Jul 21, 2016, 10:37 PM
Registered User
I also find some new photos of h501c:

Jul 22, 2016, 03:08 AM
Registered User
capitanharlock's Avatar
That's him!
Colours apart it looks identical to his big brother.
I guess that fpv functions and follow me are only a matter of the different remote.

If you need any specific photo, just let me know and I will post it.

Btw I ordered to more batteries from Aliexpress, I looked for cheaper equivalents but it looks like there's no 2700mah 2 batteries that weigh the same or less.
Last edited by capitanharlock; Jul 22, 2016 at 06:23 AM.
Jul 22, 2016, 05:03 PM
Registered User
What about information on transmitter LCD display. It says how many satelites on GPS, so it is one of OSD information - have it some another OSD information (e.g. azimuth, height etc.)? Some photo of display in action?
Jul 25, 2016, 02:43 AM
Registered User
capitanharlock's Avatar
Take a look at the manual page.
Jul 27, 2016, 04:39 AM
Registered User

OSD information

Transmitter display tell Head orientation or Height or Distance.
So what Head orientation mean? How I can select what it tell and what mean M2 (left bottom) on LCD? Maybe Mode 2?
Jul 27, 2016, 09:57 AM
Registered User
capitanharlock's Avatar
M2 should stand for mode 2. Head orientation means where thedrone is heading (let's say 15, it's 15 degrees north). You can't select what's it is shown on the display.
Jul 28, 2016, 10:27 AM
Registered User
Again one question:
Is there USB port like H501S?
Jul 28, 2016, 04:02 PM
Registered User
capitanharlock's Avatar
Sure. I don't see any firmware on the hubsan site though...
Jul 29, 2016, 04:39 AM
Registered User
Then it's possible same board as H501S without 5.8G chip

E: Hubsan H501S H501C X4 RC Quadcopter Spare Parts 5.8G Image Transmission Module H501S-11
H501C maybe have 5.8G chip or maybe not

E2: Cameramodule is without 5.8G chip. There is place for it, so maybe this can upgrage with H501S cameramodule.
Last edited by Johtaja59; Aug 11, 2016 at 08:57 AM. Reason: to be or not to be
Jul 31, 2016, 04:48 AM
Registered User
capitanharlock's Avatar
Someone should open it in order to check.
Aug 02, 2016, 09:37 AM
Registered User

Not same quad :(

I tried to pair the transmitter from my H501S with this quad, but I haven't had any success
Hubsan H501C First flight (7 min 58 sec)
Aug 03, 2016, 03:45 AM
Registered User
Does it have the manual (non gps) flying mode of the H501s?
Aug 03, 2016, 06:02 PM
Registered User

How this install?

Durable FLYING 3D 2 Axis Airborne Brushless Gimbal for Hubsan X4 FLYING 3D X8 Quadcopter - BLACK $39.00
Aug 04, 2016, 02:06 PM
Registered User
capitanharlock's Avatar
Originally Posted by doctortim
Does it have the manual (non gps) flying mode of the H501s?
Sure, it's the expert mode.