Thread Tools
Sep 22, 2019, 12:22 PM
Registered User
Beautiful shapes, like the full-scale 310. What's a punch list?
Sign up now
to remove ads between posts
Sep 22, 2019, 12:38 PM
Registered User
XDmToter's Avatar
Punch list = list of issues found during beta testing to be corrected before final release.
Sep 22, 2019, 04:44 PM
Registered User
Thanks, XDmToter, for the definition. And a tip of the hat to Michigan (I'm originally from Ohio). I'm a word guy (B.A. in English), so I was curious about "punch." I see now it's more visceral than cranial, like "I'm going to punch out all the bad guys who are messing with the success of my project."
Sep 22, 2019, 04:52 PM
Registered User
Jeff, I had to do a double take on your picture update. I see you're doing a straight tail this time. Just my opinion, probably heavily influenced by my childhood love for Sky King, but I always thought Cessna got the shape right the first time, aesthetics-wise.
Sep 24, 2019, 08:14 AM
Jer. 29:11
jeffsch's Avatar
I thought it might be nice to include an alternate tail and wingtip tanks so one can build a facsimile of either model.
Oct 21, 2019, 09:23 PM
Jer. 29:11
jeffsch's Avatar

Plans


I finished the second prototype and here are the plans. I'll post some construction photos shortly.

It has been very satisfying to collaborate with Ken on this design.

Hope you enjoy building and flying this model as much as I do.
Last edited by jeffsch; Oct 26, 2019 at 12:42 PM. Reason: Clarified plans and added recommended CG
Oct 21, 2019, 11:15 PM
Registered User
Yay! Thank you, Jeff! And thank you, Ken, for kicking this off.
Oct 22, 2019, 06:55 PM
Jer. 29:11
jeffsch's Avatar
Here's a picture of the two prototypes side-by-side.
Oct 22, 2019, 08:05 PM
Registered User
Amazingly realistic prototypes, Jeff! Where do you get those nice red and black 90 degree weights?
Oct 22, 2019, 10:03 PM
Ken's CAD Models
dz1sfb's Avatar
Thread OP
I miss the plastic workmen.

Ken
Oct 23, 2019, 08:26 AM
Retired CAD guy
birdofplay's Avatar
Those "weights" look like WELDERS alignment Magnets from Harbor Freight, et al

https://www.harborfreight.com/4-piec...ers-93898.html
Last edited by birdofplay; Oct 23, 2019 at 09:23 AM.
Oct 23, 2019, 09:23 AM
Retired CAD guy
birdofplay's Avatar
Here's a freebee contribution to the Project.

All the individual and duplicated parts layed out on MPF

Update made Oct 24 2019
Last edited by birdofplay; Oct 24, 2019 at 02:49 PM.
Oct 23, 2019, 05:19 PM
Registered User
Quote:
Originally Posted by birdofplay
Those "weights" look like WELDERS alignment Magnets from Harbor Freight, et al

https://www.harborfreight.com/4-piec...ers-93898.html
Thanks for the link, birdofplay. Yep, those are them.
Oct 24, 2019, 08:48 AM
Jer. 29:11
jeffsch's Avatar
Quote:
Originally Posted by dz1sfb
I miss the plastic workmen.

Ken
:-)


Quick Reply
Message:

Thread Tools