Thread Tools
Jan 10, 2016, 07:55 AM
Registered User
thanks for the videos guys

From what I've seen I have a question: is it possible to increase the hysteresis of the switching threshold between colour and b/w image?

Thx
Sign up now
to remove ads between posts
Jan 10, 2016, 10:28 PM
Born for RC Fanatics
Thread OP
Quote:
Originally Posted by okke dillen
thanks for the videos guys

From what I've seen I have a question: is it possible to increase the hysteresis of the switching threshold between colour and b/w image?

Thx
Thanks for the feedback. Yes, it's possible.
Jan 10, 2016, 11:23 PM
Registered User
Harry.Hastur's Avatar
This looks amazing. Is there a way to adjust the settings? For example, force it to stay in color?
Jan 12, 2016, 01:07 AM
Born for RC Fanatics
Thread OP
Quote:
Originally Posted by Harry.Hastur
This looks amazing. Is there a way to adjust the settings? For example, force it to stay in color?
If you want one of this kind we can customize for you.
Jan 12, 2016, 08:52 PM
Registered User
I did a side-by-side comparison between the RunCam Owl and the RunCam PZ0420m. Setup on the same quad with separate transmitters and DVR recorders.

RunCam Owl vs RunCam PZ0420m (4 min 42 sec)
Jan 12, 2016, 09:03 PM
Can you fly bobby?
MK1G4V's Avatar
Quote:
Originally Posted by marblekit
I did a side-by-side comparison between the RunCam Owl and the RunCam PZ0420m. Setup on the same quad with separate transmitters and DVR recorders.

http://youtu.be/T8_PJkitr1U
Cool but the colors on both are way off. The PZ0420M looks like flying in the desert and the Owl looked like you were flying over a field full of cabbages lol

Was the PZ0420m a touch out of focus too or was that just me?
Great vid!
Jan 12, 2016, 09:35 PM
dx4life
The vibration on the owl is unflyable!
Jan 13, 2016, 03:39 AM
Registered User
Quote:
Originally Posted by marblekit
I did a side-by-side comparison between the RunCam Owl and the RunCam PZ0420m. Setup on the same quad with separate transmitters and DVR recorders.

http://youtu.be/T8_PJkitr1U
Isn't PZ0420m supposed to have much better quality?
was the WDR turned on?
Jan 13, 2016, 05:02 AM
Registered User
Harry.Hastur's Avatar
Does the Owl use a CMOS or CCD sensor? Doesn't say on the product page.
Jan 13, 2016, 10:53 AM
Registered User
Quote:
Originally Posted by BrainDrain_dx
The vibration on the owl is unflyable!
That's my quad, not the Owl's fault. Vibration from the frame.
Jan 13, 2016, 10:54 AM
Registered User
Quote:
Originally Posted by FlyingPancake
Isn't PZ0420m supposed to have much better quality?
was the WDR turned on?
Stock settings for both cameras. Is WDR on by default?
Jan 13, 2016, 10:56 AM
Registered User
Quote:
Originally Posted by Harry.Hastur
Does the Owl use a CMOS or CCD sensor? Doesn't say on the product page.
I'm not sure. I thought it was CMOS but I've heard it was CCD as well
Jan 13, 2016, 10:58 AM
Registered User
Quote:
Originally Posted by MK1G4V
Cool but the colors on both are way off. The PZ0420M looks like flying in the desert and the Owl looked like you were flying over a field full of cabbages lol

Was the PZ0420m a touch out of focus too or was that just me?
Great vid!
The color on the PZ0420m is more accurate. It is a field of tumble weeds. The owl makes the slightest green look super green to blue.
Jan 13, 2016, 12:19 PM
Firmware Fiend
The Quasar's Avatar
Quote:
Originally Posted by Harry.Hastur
Does the Owl use a CMOS or CCD sensor? Doesn't say on the product page.
It's a myyyyysssssterrrryyy. Seriously, I've never seen a new camera get released with less specs than the Owl. Checking the first two pages of a Google search, it seems that everyone is happy to just copy and paste the specs straight off the runcam website, which mysteriously omit that relatively important specification. I think Bruce mentioned it's a CMOS cam in his review, and just by looking at the few crumbs runcam provides as specs, I would think it has a 1/2" CMOS sensor. From the video above comparing the Owl with the PZ0420m, the Owl looks to have the characteristic "warble" of a CMOS cam, while the PZ seems almost completely unaffected by a "frame with bad vibrations." I'd like to get some clarification on the sensor spec, cuz if it's a plain old CMOS sensor without WDR and the characteristic white balance issues that come with CMOS sensors, I'm not interested--especially considering the price.
Jan 13, 2016, 10:40 PM
Born for RC Fanatics
Thread OP
Quote:
Originally Posted by harry.hastur
does the owl use a cmos or ccd sensor? Doesn't say on the product page.
mccd


Quick Reply
Message:

Thread Tools