RMRC Hellbender 122 and 204 - Page 5 - RC Groups
Thread Tools
Jan 07, 2016, 09:07 AM
Registered User
an arduino can flash anything.
Sign up now
to remove ads between posts
Jan 07, 2016, 09:11 AM
Registered User
Except a bootloader. Really hoping it has blheli bootloader
Jan 07, 2016, 09:20 AM
Registered User
an arduino can be used as an isp to flash the bootloader.

https://github.com/4712/BLHeliSuite/...ArduinoISP.pdf
Jan 07, 2016, 10:25 AM
Ive asked the guys here and we are all pretty darn sure the 4 in 1 ESC has the BLheli bootloader
Jan 07, 2016, 10:29 AM
Registered User
Nice!
Jan 09, 2016, 04:06 PM
Armattan Spy
Planning to build the Hellbender 204 with
(Rotorgeeks 2204 2300kv OR cobra 2204 2300kv) and (HQ5x45BN or 5x4x3 triblades) powered by a 4s 1500mah Pack and 20amp little bees

Anything look wrong to anyone? Anything I should change? I was wondering if I should go with 30amp ESCs
Last edited by zaniix; Jan 09, 2016 at 04:56 PM.
Jan 09, 2016, 11:24 PM
RMRC Team Pilot
awkBOTS's Avatar
Youll be fine on all that. 20a esp. mrm zuess are great. I would go with the e max race spec motors 2205 that rmrc is carrying and have in stock personally. Going to try those as soon as i get back from xdc
Jan 10, 2016, 01:29 AM
Uly
Uly
Registered User
hey guys i just ordered the 122 last night ...what fpv camera are you guys running
Jan 10, 2016, 03:08 PM
Uly
Uly
Registered User
I'm also looking to get the 4-1 rmrc 12a esc to run 4s on the rmrc 1306 motors but I'm not sure I'll be over on the amps, anybody know it'll work together?
Jan 10, 2016, 08:26 PM
Certifiable
Gregs04.5's Avatar
Regarding the 4-1 ESC, I was wondering if there was any reason not to swap input wires and change output assignments. What I'd like to do is clock it 90* so I can put the power leads to the rear, and wire the motors to the nearest corner.

I know this question might belong in a different area, but since I just bought a 122, and 4-1 from you guys........................
Jan 11, 2016, 07:20 AM
Quote:
Originally Posted by Uly
hey guys i just ordered the 122 last night ...what fpv camera are you guys running
I run the fatshark 700v2, but many are using the RMRC Pico camera.

Quote:
Originally Posted by Uly
I'm also looking to get the 4-1 rmrc 12a esc to run 4s on the rmrc 1306 motors but I'm not sure I'll be over on the amps, anybody know it'll work together?
You should be just fine with that setup! That is what many of us here in the shop are doing!

Quote:
Originally Posted by Gregs04.5
Regarding the 4-1 ESC, I was wondering if there was any reason not to swap input wires and change output assignments. What I'd like to do is clock it 90* so I can put the power leads to the rear, and wire the motors to the nearest corner.

I know this question might belong in a different area, but since I just bought a 122, and 4-1 from you guys........................
I just checked with our support guys and were pretty sure you cannot change the output assignments on the 4in1 ESC, BUT you can just reference this picture to see which color input wire you need to attach for each motor.


Name: 4in1.jpg
Views: 263
Size: 322.1 KB
Description:
Last edited by zanderman111; Jan 11, 2016 at 07:50 AM.
Jan 11, 2016, 09:38 AM
AMA 1051390
No but you can in *flight
Jan 11, 2016, 10:44 AM
polar313
@zanderman111

Eta on when the 1306 3300kv CW motors will be back in stock?
Jan 11, 2016, 01:47 PM
Quote:
Originally Posted by polar313
@zanderman111

Eta on when the 1306 3300kv CW motors will be back in stock?
Not sure yet, they sold fast! Ill post an update as soon as I can find out
Jan 11, 2016, 02:01 PM
Team Warpsquad
Mr.Aaron's Avatar
Wow did not know there was a new 1306 motor from rmrc, very cool. That might be a fun motor on 4s if the amps are not too much . Love seeing all these new 1306's release recently

Now we need some more good smaller capacity lipo's that can deliver.
Last edited by Mr.Aaron; Jan 11, 2016 at 02:25 PM.


Thread Tools