RMRC Hellbender 122 and 204 - Page 3 - RC Groups
Thread Tools
Dec 30, 2015, 08:27 AM
Registered User
Any estimated price these frames will be selling for?
Sign up now
to remove ads between posts
Dec 30, 2015, 02:03 PM
McSkies's Avatar
Quote:
Originally Posted by Veker
Any estimated price these frames will be selling for?
What would you prefer for prices?
Dec 30, 2015, 10:44 PM
Registered User
$50-$60 Does price dictate the quality of carbon fiber?
Dec 30, 2015, 11:28 PM
RMRC Team Pilot
awkBOTS's Avatar
I have no input on or of actual final price, but i know for a fact high quality carbon is/will be used. Going on my other rmrc frames as well as my prototype hellbenders.
Dec 31, 2015, 03:07 PM
Registered User
Well for the 122 the competition is $25 (atom). I can't see the smaller one for going for more than that.

But I always prefer my favorite price: $0.
Dec 31, 2015, 03:43 PM
Registered User

RMRC BLheli 4 in 1 ESC - 12A


Anyone using the RMRC BLheli 4 in 1 ESC - 12A with this yet?
Dec 31, 2015, 06:19 PM
QuAd FaNaTiC
Razors edge 29's Avatar
should be cheaper than Goby for micro version anyway
Dec 31, 2015, 06:21 PM
Registered User
Quote:
Originally Posted by zanderman111
you will have to trim these. We were pretty disappointed that HQ didnt make their props actually 3 inches...
The 3x3x3 triblades, and the new round of 3x3s, are both actually 3" props.
Dec 31, 2015, 08:33 PM
McSkies's Avatar
Quote:
Originally Posted by derelicte
Well for the 122 the competition is $25 (atom). I can't see the smaller one for going for more than that.

But I always prefer my favorite price: $0.
Yes, $0 would be nice. These frames will be competitively priced.
Dec 31, 2015, 08:35 PM
McSkies's Avatar
Quote:
Originally Posted by Riverhill FPV
Anyone using the RMRC BLheli 4 in 1 ESC - 12A with this yet?
I'm not sure if any of our guys have ran it on the hellbender yet. Possibly on the goby 180 though.
Dec 31, 2015, 11:54 PM
RMRC Team Pilot
awkBOTS's Avatar
Quote:
Originally Posted by TemjinStrife
The 3x3x3 triblades, and the new round of 3x3s, are both actually 3" props.

Yes and are actually much more durable.
Jan 03, 2016, 08:37 PM
Certifiable
Gregs04.5's Avatar
Are there pre-orders being taken on the 122's?
Jan 04, 2016, 06:54 AM
McSkies's Avatar
Quote:
Originally Posted by Gregs04.5
Are there pre-orders being taken on the 122's?
No, we are not currently doing pre-orders, but they should be in stock very soon.
Jan 05, 2016, 07:36 AM
I just wanna fly, fly, fly
Brainstorm's Avatar
Quote:
Originally Posted by zanderman111
The smaller version is 122mm and spins 3" props - AND is considerably lighter than two sticks of butter AUW
ROTFL, Zander! The "two sticks of butter" quote from the "drone registration" FAQ is going to entertain for a long time. A little humor goes a long way.

I love the little Baby Hellbender!



Quote:
Originally Posted by Ozydego
My little Hellbender 122 prototype is crazy fun & with a 4s 450mAh battery is only 155 grams.
Nice build, Ozydego! The Baby Hellbender looks mean with those 1306 motors!



Quote:
Originally Posted by Ozydego
Personally, I made a 4s out of two 2s 450s. I'm hoping the 4s 800s we will have for sale soon will be the go to pack.
Doubling up old 2S packs for 4S power is a good way to reuse them once they're no longer fast enough. Along with the proliferation of micro brushless quads, I look forward to the proliferation of smaller high-C LiPo packs.

Quote:
Originally Posted by Riverhill FPV
Anyone using the RMRC BLheli 4 in 1 ESC - 12A with this yet?
Thanks for the pointer, Riverhill! I didn't realize that RMRC now had its own BLHeli 4-in-1 ESC. I'm a lot more comfortable trying that than the Chinese and RTFQ versions that seem to lack QC. Not cheap at $34, but I'll be ordering one for sure.

"A perfect solution for the new craze that is sub 250g multirotors!"



Quote:
Originally Posted by McCleary.11
Yes, $0 would be nice. These frames will be competitively priced.
McCleary: My main thought on price of CF would be about quality of the cutting. I absolutely love the smooth edges of the waterjet-cut plates of my RotorX Atom 122. Sanding CF edges drives me nuts! Smooth edges from the factory would be worth a premium to me on any frame.

PS: Also nice to see that you will have RMRC branded 1306 3300KV motors. Bet you are going to sell many of them with the sub-250g craze!
Last edited by Brainstorm; Jan 05, 2016 at 07:52 AM.
Jan 05, 2016, 08:42 AM
McSkies's Avatar
204 is listed and will have stock added today!

http://www.readymaderc.com/store/ind...oducts_id=5032


Thread Tools