Pica 1/12 Corsair power system - RC Groups
Thread Tools
Jul 23, 2004, 02:48 PM
Crash Test Dummy
Pilot_Tony's Avatar

Pica 1/12 Corsair power system

I'd like to get some help on a future project- a Pica 1/12 Corsair e-conversion. I believe it was orignally for a .15-.25 glow power. Here's some stats:

w/s 40.5''
w/a 300 sq in
lgth 32.75 ''

Since I have minimal electric experience. I was wondering if someone could suggest a motor/battery/controller setup? Something along the lines or brushed/brushless and NMH/NICAD or LiPO combos.


Sign up now
to remove ads between posts
Jul 23, 2004, 03:26 PM
Registered User
TMO's Avatar
I did that plane with an AXI 28/20/10 on 8cells and an 11x7 APC. It flew, but was only adequate. The kit is VERY heavy. I did not lighten it enough. Perhaps it would be better today with a Lipo setup (the Battery alone on mine weighed 14oz.)

Unless you already have it, I would consider looking at one of their "electric versions", if they ever reappear from their "move"