Thread Tools
Oct 24, 2015, 10:38 AM
Registered User

Opentx Turnigy 9x Frsky telemetry


Iíve just completed modifying my Turnigy 9x for telemetry using FrSky DJT transmitter and DFR-II receiver.
I also connected an external battery monitor to the analog side connector and flashed the radio with the latest v2.1.3 FW with the telemetry support.

So far most of my tests passed except one, the alarm. I read the right voltage monitor from the receiver but when the voltage reaches the set points for alarms nothing happen. I expected a loud buzzer warning.
In Bar mode, when the voltage reaches the first set point it turns from solid to chess pattern.

Am I missing something is my settings?

Sign up now
to remove ads between posts

Quick Reply

Thread Tools