Thread Tools
Oct 21, 2015, 06:06 AM
Thread OP
Discussion

New remote controller firmware for Phantom 3 P/A, Inspire 1 series and M100


Remote controller firmware v1.4.30 is now available for upgrade. To upgrade, launch the DJI GO app, tap through Camera View > Aircraft Status Bar > Overall Status, and follow the on-screen instructions.

New features include:

1. Press and hold the C1 button then use the gimbal dial to carry out manual focus for X5 gimbal.

2. Press and hold the C2 button then use the camera setting dial to trim the roll movement of the gimbal.
Sign up now
to remove ads between posts


Quick Reply
Message:

Thread Tools