Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
This thread is privately moderated by AMTJIM, who may elect to delete unwanted replies.
Old Jul 14, 2004, 09:03 PM
AMTJIM is offline
Find More Posts by AMTJIM
Trader Rating: 16
"Bible Thumper"
AMTJIM's Avatar

Planes for sale.


I am finishing up here in El Paso and getting ready to move. These items are boxed or I am in the process of building boxes for them.

1) Rare Combat Models F-16 sloper(foamie, not EPP), alot of work has been done on this plane. It's no longer in production, I was going to power it, but it's still un-modified. Size wise it's about a .40 size plane. $35.00 shipped.

2) Rare Combat Models F-15 Pusher Jet(foamie, not EPP). Has been set up for tailerons, but needs to be reworked with stronger shafts. Painting has been started in a southwest scheme, but needs finishing or repainting. Can still be built as .28~.46 glow(depending on how you finish it) or electric(brushless). This plane is no longer in production and has sold for over $150.00. $50.00 shipped firm.

3) My "Star Wars" Multiplex Sonic Liner. It's been crashed and needs a new canard, it's in decent shape otherwise. Karina at Cermark has them for about 15.00. Comes with nothing. $35.00 local pick up

4) GWS A-10 parts(wing, nacelles, and complete tail section) In working condition $20.00 shipped.

SOLD5) Guillows B-17 kit, (not mine, selling for a friend)opened but unstarted, everything but props in the kit, 1 small cracked piece of balsa, looks to be in usual Guillows condition $25.00 shipped.SOLD

SOLD6) Multiplex Cargo, never crashed, comes with servo wiring, 1 servo in bombay and MEC 80 amp controler. $170.00SOLD

SOLD TO SAMMYB 7) Graupner Star Jet, drops bombs, comes with C-50 ESC and HS-81 to operate bomb release. $50.00 shipped SOLD TO SAMMYB

CONUS shipping, probably by greyhound, check that you have that service at your location.
Last edited by AMTJIM; Nov 01, 2004 at 10:32 PM.
Sign up now
to remove ads between posts
Old Jul 14, 2004, 11:04 PM
AMTJIM is offline
Find More Posts by AMTJIM
Trader Rating: 16
"Bible Thumper"
AMTJIM's Avatar
F-15, Sonic Liner
Last edited by AMTJIM; Oct 12, 2004 at 04:09 PM.
Old Jul 15, 2004, 10:07 AM
snowfallonme is offline
Find More Posts by snowfallonme
Trader Rating: 0
I invented electricflight
would yo ship the star wars model?
Old Jul 17, 2004, 10:22 PM
AMTJIM is offline
Find More Posts by AMTJIM
Trader Rating: 16
"Bible Thumper"
AMTJIM's Avatar
Sorry, that thing is tooo big to ship, not sure exactly what items I will be boxing up. I'll probably wait and take them to the Fly-In Soccoro N.M. before I start building boxes. For now, everything is still available for local pick-up if anyone happens to be in this area.
thanx
Old Jul 18, 2004, 01:10 PM
FL62 is offline
Find More Posts by FL62
Trader Rating: 105
Average Joe 2 Semi-Pro n Back!
FL62's Avatar
Any idea how much the F-15 weighs? I might be interested in it for an EDF Conversion project....

BTW, I assume you are an A&P for Southwest Airlines?

If so, do you have any quams on selling to another A&P for a competing airline.... (Phoenix Based )
Old Jul 18, 2004, 06:49 PM
AMTJIM is offline
Find More Posts by AMTJIM
Trader Rating: 16
"Bible Thumper"
AMTJIM's Avatar
Right now, the painted shell with pushrods weighs 1lb 14 oz. You can see my twin 480 pusher version in the jets forum, flew very well, but a servo stripped in flight. I didn't plan on building it as EDF, so the top and bottom are already epoxied together. Not doing the A&P thing at this time, I've been busy as a stay at home Dad and getting a degree. I hope to back in with the airlines this December.
Last edited by AMTJIM; Jul 18, 2004 at 06:52 PM.
Old Jul 18, 2004, 08:30 PM
little flyer is offline
Find More Posts by little flyer
Trader Rating: 45
Support www.usf3jteam.com
little flyer's Avatar

f-16


do u have a picyure and specs of the f-16?
and a pic of the v bat wing as well as specs.
Last edited by little flyer; Jul 21, 2004 at 11:48 AM.
Old Jul 21, 2004, 11:49 AM
little flyer is offline
Find More Posts by little flyer
Trader Rating: 45
Support www.usf3jteam.com
little flyer's Avatar
???
Old Jul 21, 2004, 05:01 PM
AMTJIM is offline
Find More Posts by AMTJIM
Trader Rating: 16
"Bible Thumper"
AMTJIM's Avatar
Here are the specs on the F-16 and a pic. I do have the bottom fuse pieces, I was just showing the wing and all the internal compartments.
49.5 wingspan
47 length
434 sq in wing
Last edited by AMTJIM; Oct 12, 2004 at 04:10 PM.
Old Oct 12, 2004, 04:11 PM
AMTJIM is offline
Find More Posts by AMTJIM
Trader Rating: 16
"Bible Thumper"
AMTJIM's Avatar
bump
Last edited by AMTJIM; Oct 12, 2004 at 05:01 PM.
Old Nov 01, 2004, 05:32 PM
AMTJIM is offline
Find More Posts by AMTJIM
Trader Rating: 16
"Bible Thumper"
AMTJIM's Avatar
prices revised
Old Nov 01, 2004, 05:47 PM
Dan Smith is offline
Find More Posts by Dan Smith
Trader Rating: 18
Registered User

Graupner Star Jet


Graupner Star Jet------Is it the green wing thing?? Power requirements?? Paperwork-c/g etc?? Same questions for the CBM F-15
Old Nov 01, 2004, 05:49 PM
Cecil M Wethy is offline
Find More Posts by Cecil M Wethy
Trader Rating: 95
Registered User

guillows B-17


I will buy. Send me tour address and I will send money.
thanks, Cecil
Old Nov 01, 2004, 06:03 PM
SammyB is offline
Find More Posts by SammyB
Trader Rating: 229
Rem The Wasp CV-7 9/15/42
SammyB's Avatar
I'm interested in the star jet. What kind of shape is it in? Any crashes? No motors right? If the stabs are already on, can I still get to the servos? I'll take it at your asking price if you can let me know more in a pm maybe?
Old Nov 01, 2004, 06:04 PM
AMTJIM is offline
Find More Posts by AMTJIM
Trader Rating: 16
"Bible Thumper"
AMTJIM's Avatar
Cecil, sent you a PM
Dan, the green wing is the Star Jet. I have the instructions. It has an epoxy coated acryllic paint job. It's basically finished, the motor nacelles need an epoxy coating and a few other areas need touching up. The lower surface is glassy smooth and shiny, it could be sanded and sprayed with matte finish like the rest of the plane. The tails and wing cannons need to be epoxied into place. It drops 2 bombs, controled by an HS-81. It comes with 3 bombs, the HS-81, an C-50 esc with heatsink and servo wiring. I changed the wing servos to mount outside of the tail so you won't need to cut the tail to fix or replace them. This plane is starting to get a little heavy, I doubt spd 400's will fly it very well unless they are geared. Some long can 400's or a decent 480 would also be good. This isn't a good beginner plane, especially now with the added weight. Using a bungee launcher to get this in the air would probably be a good idea. A brushless motor system would be best, but you will need a different set of ESC's for that. I have other pics if you send me your email address.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
looking for someone in Tucson Az. with fff AzJason Foamies (Kits) 1 Feb 23, 2007 12:50 PM
any interest in a 'super' piccolo for sale? unsped Aircraft - Electric - Airplanes (FS/W) 0 Mar 13, 2003 03:00 AM
Hobby Shops in the Tucson, AZ area theKAT Parkflyers 10 Feb 18, 2002 01:36 PM
Flying in Tucson, AZ kahuck Parkflyers 0 Jul 04, 2001 07:42 PM