Thread Tools
Jul 14, 2004, 06:07 PM
Registered User

200 Watts in the Wattage Powerfan?

First of all, I was wondering if a wattage powerfan can handle 200 Watts, and secondly, if it can, I was leaning twords using a motor ~18 turns, would that do it, or what motor am I looking for. I would like to keep the cell count between 10-12 cells and amp draw ~15 A. a little over is fine.

Sign up now
to remove ads between posts
Jul 14, 2004, 10:45 PM
Registered User
No replies ...
Iíll try to ask a more general question then.

Between the Wattage Super 400 Cobalt motor, and the Permax 400 BB Motor (both Around $35) Which would perform best in the Powerfan in a 150 Watt range?

Any help would be appreciated, Thanks!
Jul 14, 2004, 11:30 PM
Dieselized User
gkamysz's Avatar
Search the Jets forum. There will be plenty of information.

Jul 15, 2004, 02:40 AM
Registered User
vintage1's Avatar
I would not use anything less than a 480 class can motor at 150 Watts. You can certainly stick that much onto a long can permax 480 on 10 cells or 3s LIPO, although not as much comes out.

The cobalt should be far and away the better motor, and probably can do the job allright.

But for fans wher every last ounce of thrust is important, I think a mega 16/15/3 would be the ideal sort of 'cooking' brushless to go for.
Jul 15, 2004, 11:05 AM
Registered User
Alright, so I ether need to get a bigger fan, or look into brushless...
I'll check out the Mega 16/15/3


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Wattage Powerfan - used in what? HoverDown3K Foamy EDFs 4 Apr 06, 2006 10:03 AM
Discussion Wattage PowerFan - used in what? HoverDown3K Electric Ducted Fan Jet Talk 6 Apr 03, 2006 09:41 PM
Help! I need to find replacement rotors for a Wattage Powerfan here in the UK! Lewist Electric Ducted Fan Jet Talk 9 Jul 27, 2005 03:41 AM
Question In search of 200 watts viol8r Power Systems 9 Mar 17, 2005 09:20 PM
Himax motors in wattage powerfan Mike Caspari Electric Ducted Fan Jet Talk 96 Aug 22, 2004 01:30 PM