Thread Tools
This thread is privately moderated by new user, who may elect to delete unwanted replies.
Oct 05, 2015, 07:18 PM
Trader Rating: 20
OEF 10-11
new user's Avatar
Thread OP
$35.00 USD
Seller Pays Shipping
Sold

Gecko 65a ESC, Brand new, with LCD programmer


Ok, up for sale is a Gecko 65a ESC. Specs below. This is the warranty replacement I got last week. I bought a castle and no longer need this.

Comes with a used LCD programming card. include USB.

The box has a tear from where I try getting the contents out. Warranty card is not filled out by me so buyer can fill it out and use it if need be.


ZTW GECKO SERIES Airplane/Heli ESCs are competition-grade speed controllers from one of the most trusted RC electronics manufacturers in the industry. NEW FEATURES found in Gecko Series ESCs include PC data logging, firmware upgradability, and an 8A SBEC adjustable up to 8.4v to help your HV servos reach their fullest potential! Best of all, Gecko Series ESCs come standard with the ZTW quality, performance, and reliability you have come to trust.
The high power SBEC found in ZTW Gecko Series ESCs has been specifically designed for extreme aerobatics and therefore has the capability to support the higher momentary peak demand loads to eliminate the possibility of unwanted shutdowns, and is also capable of supporting continuous simultaneous multiple servo operations typically found in CCPM equipped hardcore 3D E-helicopters.

Features:
Data logging via PC interface (optional accessory included with program card)
Firmware upgradable via PC interface
High SBEC current output: 8A continuous, 16A burst
Adjustable SBEC voltage up to 8.4v for optimum performance from HV servos
Extremely low internal resistance
Smooth and accurate throttle linearity
Power arming protection, over-heat protection, low-voltage protection and lost signal protection
Supports high RPM motors
Advanced governor mode and soft start
Optional programming card & PC USB interface available

Specifications:
Output: 65A continuous, 85A burst for 10 seconds
Input voltage: 2-6s LiPo; 5-18 cell Ni-XX
SBEC output: 5.0v / 6.0v / 7.4v / 8.4v adjustable @ 8A (switching)
Weight: 68g
Dimensions: 69 x 33 x 11.5mm
Programmable Options:

Brake setting (off / soft / mid / hard -- default: off)
Battery type: (Ni-XX / LiPo / LiFe -- default: LiPo auto detect)
Cut-off voltage threshold (2.8V 50% / 3.0V 60% / 3.2V 65% / No protection -- default: 3.0V 60%)
Factory default setup reset
Timing settings (auto / 2 / 8 / 15 / 22 / 30 -- default: auto)
SBEC Voltage Output (5.0v / 6.0v / 7.4v / 8.4v -- default: 5.0v)
Governor mode: (RPM off / 1st Soft Start / 2nd Soft Start / Gov Mode 1 / Gov Mode 2 -- default: RPM off)
Motor rotation: (forward / reverse -- default: forward)
Start up (Low / Mid / High-- default: 30%)
LVC cut-off type: (reduce gradually / cut-off -- default: reduce gradually)

asking 55 shipped for the combo. PayPal (gift please) cash, money order.

Last edited by new user; Oct 11, 2015 at 12:21 PM.
Sign up now
to remove ads between posts
Oct 07, 2015, 12:39 PM
Trader Rating: 20
OEF 10-11
new user's Avatar
Thread OP
50 shipped
Oct 07, 2015, 05:09 PM
Trader Rating: 20
OEF 10-11
new user's Avatar
Thread OP
Actually not pending a sale
Last edited by new user; Oct 07, 2015 at 07:08 PM.
Oct 10, 2015, 06:30 PM
Trader Rating: 20
OEF 10-11
new user's Avatar
Thread OP
Bump.
Oct 11, 2015, 12:20 PM
Trader Rating: 20
OEF 10-11
new user's Avatar
Thread OP
$35 shipped for the next 24 hours
Oct 11, 2015, 10:06 PM
Trader Rating: 115
Pro Bro #1008
birdie_in_texas's Avatar
i will take it
Oct 12, 2015, 05:14 AM
Trader Rating: 20
OEF 10-11
new user's Avatar
Thread OP
Quote:
Originally Posted by birdie_in_texas
i will take it
Will be shipping out today.


Thanks


Quick Reply
Message:
Thread Tools