New to E/F - need help - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Jun 08, 2001, 11:05 AM
Registered User

New to E/F - need help


I've been flying large scale gas for a number of years and want to build and fly an electric. Picking a 4ch plane seems to be the easy part, but I'm at a total loss when it comes to the running gear. I'm intrigued by SR's X-250, but not sure if their package for gear is the best route to go. The terminology is all foreign to me. Any suggestions would be deeply appreciated.
Sign up now
to remove ads between posts
Jun 08, 2001, 12:01 PM
Registered User
Check out the FAQ at the top of the page. This explains all the terms used in ef. I will leave the suggestion of running gear to more established members.

Good luck, Rob.
Jun 08, 2001, 04:20 PM
Registered User
Andy W's Avatar
The suggested power setup for the X250 is the way to go. There are ways to improve upon this, but their package is a good price, and the performance is excellent for this relatively low cost setup.
..a
Jun 08, 2001, 06:52 PM
Old Desert Rat
Arizona Chuck's Avatar
If you like the X-250, which is probably a good choice, I would give them a call and tell them your predicament. Go by what they say, they will steer you in the right direction. Trust the good guys, it will save you money and make things easier. Then when you want a challenge, I have some silly plans for wimpy planes and probably bad advice. I see you are from Omaha, my old home town, still have family there.
Welcome to Ezone.
..AZ Chuck
Jun 08, 2001, 10:17 PM
Space Coast USA
hoppy's Avatar
Want a challange?? Look at the Herr Pitts Special. Many have converted it to electric. Check posts for Herr Pitts on what they are using. http://iflyherr.com/k507.html
ps. dealers sell it cheaper, of course.
hoppy